The 40G DAC Optical module is usually a cable assembly that is priced at a fixed length with fixed connectors on both ends. The connector used in the high-speed cable end has the same interface as the optical module, but the connector module on the high-speed cable does not have expensive optical lasers and other electronic components compared to the optical module, thereby greatly saving in short-distance applications. Cost and power consumption, a cost-effective, high-speed data communication solution that replaces optical modules, can be widely used in storage area networks, data centers, and high-performance computer connections by connecting switches to routers or servers.
The EPON-4081 Opical modem is a type of optical modem. The optical modem refers to a transceiver that converts the optical Ethernet signal into other protocol signals. The optical cat is also called a single-port optical transceiver. It is a product designed for a special user environment. A single E1 or single V.35 or single 10BaseT point-to-point optical transmission terminal device using a pair of optical fibers. EPON-4081 Opical modem, as an optical network terminal product built by FTTH network, the product complies with IEEE802.3ah , WiFi dual-band wireless connection speeds of up to 300 Mbps on 24 GHz, and Has high-quality EPON access capability. The EPON ONU optical network terminal has the characteristics of high reliability, good service quality assurance, manageability,scalability, and flexible networking, which can meet the requirements of high- speed broadband access.
GPON-4081 Optical modem is the abbreviation of modulator and demodulator. Chinese called modem (known as the data machine in Hong Kong and Taiwan). According to the homophonic sound of Modem, it is called "cat" relatives. It is a device that converts a digital signal into an analog signal by modulation at the transmitting end and converts the analog signal into a digital signal by demodulating at the receiving end. The so-called modulation is to convert the digital signal into an analog signal transmitted on the telephone line; demodulation, that is, converting the analog signal into a digital signal. The so-called modem. The English language of the modem is MODEM, which is used as a "translator" for analog signals and digital signals.
The optical fiber unit, Pre-terminated Drop Cable, is positioned in the center.Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides.Then,the cable is completed with a black or color LSZH sheath. It is also called leather cable. It is a new type of user access optical cable. According to the application environment and laying conditions, the cable structure and various technical parameters are reasonably designed. The characteristics of indoor soft cable and self-supporting optical cable are collected. Special equipment is used in conjunction with imported precision mold production. It is the best candidate for FTTX network solution, and it is also suitable for users of other fiber-optic FTTO and FTTB networks. Because the cross-section is like a butterfly, it is called a butterfly cable. Both sides are reinforcing members in the leather line and optical fibers in the middle.
OC280-Cross Connecting Cabinet is use for outdoor cable access network,backbone cable and indoor cable arangement,it with high-capacity,high-density fiber distribution tray,suitable for the composition,splice and distribution of fibers in optical access network to achieve the fiber optic lines connection,distributing and scheduling.It features a fully enclosed cabinet that is aesthetically pleasing; has many features such as secure fiber storage and preventability. Moreover, the cabinet logo is clear, and the connection and distribution of each fiber have obvious signals, which can meet the needs of the ribbon fiber cable and the non-ribbon fiber cable at that time.
Fiber patch cords are fiber-optic cables with connectors on both ends that can be connected directly to a computer or other network device. Fiber patch cords are commonly used to connect light emitting devices, light receiving devices, and fiber optic terminal boxes. Single-mode fiber patch cord cores are particularly small in diameter, typically only 9 μm, and have only one light propagation path. It is for this reason that light can only be transmitted along the axis of the fiber, thereby completely avoiding the waste of dispersion and light energy.
SFP Optical module is a compact optical transceiver module used in optical communications. The SFP transceiver modules are designed to support SONET/H, Fast Ethernet, Gigabit Ethernet, Fibre Channel and other communications standards. CCOFC manufactures and supplies a complete range of SFP transceiver modules which can be Customized. In addition . All of our SFP transceiver modules come with a lifetime advance replacement warranty and are 100% functionally tested. Fiber Optic Transceiver Module is a self-contained component that can both transmit and receive. Usually, it is inserted in devices such as routers or network interface cards which provide one or more transceiver module slot (e.g GBIC, SFP, XFP). CCOFC provide a full range of optical transceivers. All our fiber transceivers are 100% compatible with major brands . We also can customize optical transceivers to fit your specific requirements.
Breakout Fiber Optic Cable is also called Large-core hybrid branch cable. The cable uses an 8-core sub-unit(900μm tight fitting fiber, an aramid reinforcing element) and a non-metallic center reinforcing core. The cable sub-unit layer is twisted on the center reinforcing core form a cable core, and the outer most layer is extruded with a polyvinyl chloride(PVC) sheathed LSZH or other agreed material jackets are also available upon request. For termination and maintenance, the drop cable facilitates independent routing or branching of the individual fibers.