OC240-Cross Connecting Cabinet is use for outdoor cable access network, backbone cable and indoor cable arrangement. it with high-capacity, high-density fiber distribution tray, suitable for the composition, splice and distribution of fibers in optical access network to achieve the fiber optic lines connection, distribution and scheduling.The oc240-cross connecting cabinet is a kind of outdoor cabinet. It refers to a cabinet made of metal or non-metal materials directly under the influence of natural weather. It does not allow unauthorised operators to enter the operating cabinet, providing wireless communication stations or wired network station workstations.
The 100G QSFp Optical Module integrates the receiver and transmitter paths on one module. At the transmitting end, the four channels of serial data are recovered, retimed, and passed to the four laser drivers. The laser driver controls a 4-distributed feedback laser (DFB) with center wavelengths of 1296 nm, 1300 nm, 1305 nm, and 1309 nm. The optical signal is multiplexed to a single mode fiber through an industry standard LC connector. On the receiving side, the four optical data stream channels are optically demultiplexed by an integrated optical demultiplexer. Each data stream is recovered by the PIN photodetector and transimpedance amplifier and retimed. The module features a hot-swappable electrical interface, low power consumption and MDIO management interface. Designed according to the QSFP Multi-Source Agreement (MSA), the product features a form factor, optical/electrical connection and digital diagnostic interface, and is compliant with the IEEE 802.3bm standard.
"GY" means Outdoor optical cable for communication,"T" means Filled structure,"A" means Aluminum belt--polyethylene bonding layer. The GYTA cable is a loose tube made of a high-modulus material, which is filled with a 250 μm fiber. And the loose tube is filled with a waterproof compound. The center of the core is a metal reinforced core. For some cores, a layer of polyethylene (PE) is required to be extruded outside the metal reinforced core.
GPON-4080 Optical modem has the reliability, good quality of service guarantee, manageability, scalability and flexible networking features to meet the requirements of high-speed broadband access. It also has ITUG.984 compliant GPON standards, IGMP functionality, multiple management methods, and compatibility with major OLT vendors. The GPON-4080 Optical modem can also be said to be a modem that translates a computer's digital signals into analog signals that can be transmitted along a regular telephone line, which in turn can be received by another modem on the other end of the line. A computer-readable language. This simple process completes the communication between the two computers.
Fluke passed and Factory lowest price UTP CAT6 Ethernet cable/Network cable 4Pr 24 AWG BC/CCA/CCS/CCAG 305m/roll wholesale CCOFC factory is a professional manufacturer in producing Cat6 UTP/FTP/SFTP/STP/SFFTP/FFTP network cable, Power cable, Coaxial cable, Telephone cable etc. The cat6 network cable are applied to the wiring between the user communication terminal of the residential integrated wiring system and the distribution frame and the distribution frame between the communication terminal of the work area and the junction between the distribution wiring system, and are suitable for high-speed local area network, which is suitable for 240MHz channel bandwidth communication. The cross-shaped conductor divider design enhances near-end crosstalk and impedance performance, increasing bandwidth and signal-to-noise margin.
The fiber distribution box is suitable for the wiring connection between the optical cable and the optical communication equipment. The optical signal is extracted by the optical jumper through the adapter in the wiring box to realize the optical wiring function. It is suitable for the protective connection of fiber optic cable and wiring pigtail. It is also suitable for fiber termination point in fiber access network. This product is applied to the terminal access link in the FTTH access system, outdoor wall-mounted or hoop-mounted. The uplink is connected to the distribution cable, and the downstream cable is connected to the home, and the introduction and fixation of the optical cable, the welding of the optical fiber, and the installation and management of the optical splitter are completed, thereby realizing the splitting of the optical line.
The 40G DAC Optical module is usually a cable assembly that is priced at a fixed length with fixed connectors on both ends. The connector used in the high-speed cable end has the same interface as the optical module, but the connector module on the high-speed cable does not have expensive optical lasers and other electronic components compared to the optical module, thereby greatly saving in short-distance applications. Cost and power consumption, a cost-effective, high-speed data communication solution that replaces optical modules, can be widely used in storage area networks, data centers, and high-performance computer connections by connecting switches to routers or servers.
OC576-Cross Connecting Cabinet is used for outdoor cable access network ,backbone cable and indoor cable arrangement,it with high-capacity,high -density fiber distribution tray,suitable for the composition,splice and distribution of fibers in optical access network to achieve the fiber optic lines connection,distribution and scheduling. The ODF is used for the termination and distribution of the central trunk optical cable in the optical fiber communication system, and the connection, distribution and scheduling of the optical fiber line can be conveniently realized. Suitable for small to medium-sized wiring systems from fiber to cell, fiber to building, remote module office and wireless base station.
Communication cable is the cable that transmits telephone, telegraph, fax documents, TV and radio programs, data and other elect