Call us at +86 13377766112

Products: E1 Fibre Optic Modem

GPON 1281 Optical modem

GPON 1281 Optical modem

The optical network terminal product, GPON-1281 Optical modem, constructed as a FTTH network conforms to the ITU-T G.984 standard, WIFI dual- band wireless connection speeds of up to 300 Mbps on 24 GHz .and has dual-band wireless speeds up to 1200 Mbps, supporting 2/3 layer network protocols and high- quality voice transmission. GPON optical network terminals are characterized by reliability, good service quality assurance, manageability scalability, and flexible networking. Can meet data, data + voice, data + voice + WIFI and other access needs.

READ MORE
GYXTW Center beam tube type light armored cable

GYXTW Center beam tube type light armored cable

GY-Outdoor optical cable for communication,X-Central tubular structure,T-Filled,W-Steel polyethylene bonded sheath with steel wire. GYXTW fiber optic cable, 250um, in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound, mainly for the longitudinal water blocking of the fiber and the compactness of the fiber. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape.

READ MORE
GYFTY single mode fiber optic cable aerial fiber optic cable

GYFTY single mode fiber optic cable aerial fiber optic cable

"GY" means outdoor optical cable for communication, "F" means non-metallic reinforcing member, "T" means ointment filling structure, "Y" means polyethylene sheath. GYFTY is positioned in a loose tube made of a high modulus plastic. At the center of the core is a fiberglass reinforced plastic (FRP), and the loose tube (and the filling rope) is twisted around the central reinforcing core into a compact and round core with a gap in the core filled with a water-blocking filler. The outer core of the cable is extruded with a polyethylene inner sheath to form a cable.

READ MORE
Singlemode Patch Cord

Singlemode Patch Cord

Fiber patch cords are fiber-optic cables with connectors on both ends that can be connected directly to a computer or other network device. Fiber patch cords are commonly used to connect light emitting devices, light receiving devices, and fiber optic terminal boxes. Single-mode fiber patch cord cores are particularly small in diameter, typically only 9 μm, and have only one light propagation path. It is for this reason that light can only be transmitted along the axis of the fiber, thereby completely avoiding the waste of dispersion and light energy.

READ MORE
Stranded Layer Armored Ribbon Fiber GYDTA

Stranded Layer Armored Ribbon Fiber GYDTA

GYDTA uses steel as the central strength member ensures good tensile resistance,and improves the bending performance. It has excellent moisture resistance ability:the loose tube is filled with grease to protect the fiber, APL tape prevent the water ingress, then the cable is completed with PE out sheath. It's suitable for aerial and duct application. Because of the good moisture resistance, it can also be used in cable trench. It has the loose tube structure with ribbon cable, which is surrounded by the APL tape. GYDTA is a good option for interoffice communication,outdoor access network.

READ MORE
GPON 2480 Optical modem

GPON 2480 Optical modem

GPON-2480 Optical modem are manufactured and developed by ccofc company, which is a leader in FTTH/ FTTO broadband access network field. They are properly manageable added with features such as high-bandwidth, high reliability, low power consumption and satisfy the users requirement to access broadband, voice, data and video etc. The optical network terminal product constructed as a FTTH network conforms to the ITU-T G.984 standard, and has dual-band wireless speeds up to 1200 Mbps, supporting LC/L3 layer network protocols and high-quality voice transmission.

READ MORE
Tight Buffered Fiber Optic Cable

Tight Buffered Fiber Optic Cable

Tight buffered fiber optic cable is produced as that fiber is sheathed by buffer material. The selection of top-quality fiber, the specific production equipment and the accurate design assure the performance of the product. To be more specific, a single-mode or multi-mode fiber with a tightly-coated secondary coating structure is called a tight buffered fiber or a tight-packed fiber, and is a double-over-plastic (PVC/PVDF) directly coated on a bare fiber (UV fiber). /LSZH/Hytrel), the outer diameter of the tight-fitting fiber is usually 0.6mm and 0.9mm. It is the basic component for manufacturing various indoor optical cables. It can also be used alone and twice coated with various materials. The tight-fitting fiber can be directly used as a pigtail for the connection of various optical active or passive components, the connection of instruments and terminal equipment, and the like.

READ MORE
telecom communication equipment OC280 Cross Connecting Cabinet

telecom communication equipment OC280 Cross Connecting Cabinet

OC280-Cross Connecting Cabinet is use for outdoor cable access network,backbone cable and indoor cable arangement,it with high-capacity,high-density fiber distribution tray,suitable for the composition,splice and distribution of fibers in optical access network to achieve the fiber optic lines connection,distributing and scheduling.It features a fully enclosed cabinet that is aesthetically pleasing; has many features such as secure fiber storage and preventability. Moreover, the cabinet logo is clear, and the connection and distribution of each fiber have obvious signals, which can meet the needs of the ribbon fiber cable and the non-ribbon fiber cable at that time.

READ MORE