Call us at +86 13377766112

Products: FTTH fiber home box panel

Optical Fiber Information Panel

Optical Fiber Information Panel

Optical Fiber Information Panel, the indoor 85mm type FTTH mini fiber optic faceplate employs a compact plug-in design, combines a modern design concept, adopts imported plastic, is of a graceful appearance and applicable for FTTH, FTTO and FTTD, etc., and allows easy use in different instalation environments.The clasp design of the cover has greatly reduced the istallation strength. It is very thin and matches with other A86 panels in homes, and also meet the open or concealed cabling for optical cables. Coordinating with FC strip-type optical adaptor, it generates more options in term of fiber interfaces for users, all SC, LC and SC/FC are usable. In addition, the big diameter wrapping post in the box protects radically in an omnibearing way the optical fiber in the box.

READ MORE
Simplex Fiber Optic Cable

Simplex Fiber Optic Cable

Simplex indoor optical cable is made by evenly applying strands of aramid yarns as the strength member over tight buffer fibers and then is completed with a flame retardant sheath(CPR-Cca).

READ MORE
100km CWDM SFP 10G module compatible optical module

100km CWDM SFP 10G module compatible optical module

Description of this 100km CWDM SFP 10G module compatible optical module SFP CWDM Optical module CWDM SFP optical module is a low-cost WDM transmission technology for the access layer of the metropoli

READ MORE
GPON 4080 Optical modem

GPON 4080 Optical modem

GPON-4080 Optical modem has the reliability, good quality of service guarantee, manageability, scalability and flexible networking features to meet the requirements of high-speed broadband access. It also has ITUG.984 compliant GPON standards, IGMP functionality, multiple management methods, and compatibility with major OLT vendors. The GPON-4080 Optical modem can also be said to be a modem that translates a computer's digital signals into analog signals that can be transmitted along a regular telephone line, which in turn can be received by another modem on the other end of the line. A computer-readable language. This simple process completes the communication between the two computers.

READ MORE
Insert Type Splitter

Insert Type Splitter

The Insert Type PLC Splitters is branching devices that is used to distribute optical signals to multiple locations for processing. In optical networks, it is often necessary to split an optical signal into many identical signals, or to combine many signals into a single signal. PLC Splitter (Planar lightwave circuit splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. They are designed for FTTx Passive Optical Networks, CWDM, DWDM and optical cable TV System. PLC Splitter is responsible to distribute optical signals from Central Office (CO) to multiple premise locations.We provides whole series of 1*N and 2*N splitter products that are tailored for specific applications. All prodcts meet GR-1209-CORE-2001 and GR-1221-CORE-1999 requirements.

READ MORE
100G QSFP Dual LC LWDM 10KM Optical Communication QSFP Module

100G QSFP Dual LC LWDM 10KM Optical Communication QSFP Module

The 100G QSFp Optical Module integrates the receiver and transmitter paths on one module. At the transmitting end, the four channels of serial data are recovered, retimed, and passed to the four laser drivers. The laser driver controls a 4-distributed feedback laser (DFB) with center wavelengths of 1296 nm, 1300 nm, 1305 nm, and 1309 nm. The optical signal is multiplexed to a single mode fiber through an industry standard LC connector. On the receiving side, the four optical data stream channels are optically demultiplexed by an integrated optical demultiplexer. Each data stream is recovered by the PIN photodetector and transimpedance amplifier and retimed. The module features a hot-swappable electrical interface, low power consumption and MDIO management interface. Designed according to the QSFP Multi-Source Agreement (MSA), the product features a form factor, optical/electrical connection and digital diagnostic interface, and is compliant with the IEEE 802.3bm standard.

READ MORE
GYTA fiber optic cable multimode manufacturers

GYTA fiber optic cable multimode manufacturers

 "GY" means Outdoor optical cable for communication,"T" means Filled structure,"A" means Aluminum belt--polyethylene bonding layer. The GYTA cable is a loose tube made of a high-modulus material, which is filled with a 250 μm fiber. And the loose tube is filled with a waterproof compound. The center of the core is a metal reinforced core. For some cores, a layer of polyethylene (PE) is required to be extruded outside the metal reinforced core.

READ MORE
Breakout Patch Cord

Breakout Patch Cord

Breakout fiber patch cord is used to split 12-core MTP connectors terminated on trunk cable into simplex or duplex connectors. MPO/MTP connector is connected with trunk cable, while simplex or duplex connector on the other side can provide a different fan-out length which is convenient for device connection. Can also say this breakout patch cord is a fiber optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch, or other telecommunication equipment. Having a thick layer of protection, it is used to connect the optical transmitter, receiver, and the terminal box. This is known as "interconnect-style cabling".

READ MORE