Fiber optic patch panel is also called fiber distribution panel. Its main function is to terminate the fiber optic cable and provide connection access to the cable’s individual fibers. Fiber patch panels are termination units, which are designed to provide a secure, organized chamber for housing connectors and splice units. Fiber patch panels are available in rack mounted or wall mounted. Both types can house, organize, manage and protect fiber optic cable, splices and connectors. Rack mount panels is usually 19" or 23" universal width. The height of patch panel can be 1U, 2U, 3U, 4U, 6U, etc. The opening of the optical fiber patch panels can be slidable or fixed or revolving. Wall mount patch panel is more customized, it can be any structure and dimension. And the patch panels can be used for indoor or outdoor application.
Fluke passed and Factory lowest price UTP CAT6 Ethernet cable/Network cable 4Pr 24 AWG BC/CCA/CCS/CCAG 305m/roll wholesale CCOFC factory is a professional manufacturer in producing Cat6 UTP/FTP/SFTP/STP/SFFTP/FFTP network cable, Power cable, Coaxial cable, Telephone cable etc. The cat6 network cable are applied to the wiring between the user communication terminal of the residential integrated wiring system and the distribution frame and the distribution frame between the communication terminal of the work area and the junction between the distribution wiring system, and are suitable for high-speed local area network, which is suitable for 240MHz channel bandwidth communication. The cross-shaped conductor divider design enhances near-end crosstalk and impedance performance, increasing bandwidth and signal-to-noise margin.
"GY" means outdoor optical cable for communication, "F" means non-metallic reinforcing member, "T" means ointment filling structure, "Y" means polyethylene sheath. GYFTY is positioned in a loose tube made of a high modulus plastic. At the center of the core is a fiberglass reinforced plastic (FRP), and the loose tube (and the filling rope) is twisted around the central reinforcing core into a compact and round core with a gap in the core filled with a water-blocking filler. The outer core of the cable is extruded with a polyethylene inner sheath to form a cable.
Simplex indoor optical cable is made by evenly applying strands of aramid yarns as the strength member over tight buffer fibers and then is completed with a flame retardant sheath(CPR-Cca).
GYFDTA uses FRP as the central strength member ensures good tensile resistance,and improves the bending performance.The middle layer of aramid yarn increases the tensile strength of the cable. It has excellent moisture resistance ability:the loose tube is filled with grease to protect the fiber, APL tape prevent the water ingress, then the cable is completed with PE out sheath. It's suitable for aerial and duct application. Because of the good moisture resistance, it can also be used in cable trench. It has the loose tube structure with ribbon cable, which is surrounded by the APL tape. GYFDTA is a good option for interoffice communication,outdoor access network
GY: Outdoor communication cable T: Filled structure C: Self-supporting structure 8: 8-shaped A: Aluminum-polyethylene bonded sheath The structure of the GYTC8A cable is to insert a single-mode or multi-mode fiber into a loose tube made of a high-modulus material filled with a waterproof compound. The center of the core is a metal reinforcement.
Tight buffered fiber optic cable is produced as that fiber is sheathed by buffer material. The selection of top-quality fiber, the specific production equipment and the accurate design assure the performance of the product. To be more specific, a single-mode or multi-mode fiber with a tightly-coated secondary coating structure is called a tight buffered fiber or a tight-packed fiber, and is a double-over-plastic (PVC/PVDF) directly coated on a bare fiber (UV fiber). /LSZH/Hytrel), the outer diameter of the tight-fitting fiber is usually 0.6mm and 0.9mm. It is the basic component for manufacturing various indoor optical cables. It can also be used alone and twice coated with various materials. The tight-fitting fiber can be directly used as a pigtail for the connection of various optical active or passive components, the connection of instruments and terminal equipment, and the like.
Pre-terminated high-precision MPO/MTP patch cord can achieve multi-fiber connectivity. It also can be used for internal frame cabling. MPO/MTP multi-fiber cabling system is ideally suited for a high density environment that demands space saving and innovative cable management solutions. The spring - loaded push/pull locking mechanism of the MPO is easy to handle while guaranteeing the secure mating of the connectors. High- precision guiding pins ensure the exact adjustment of the ferrule. t offered in fiber types in standard 8, 12, 24 or 48 cores versions using a compact , and with multimode and singlemode fibres secure transition between MPO/MTP and LC or SC connections.READ MORE