Call us at +86 13377766112

Products: Factory supply Drop Cable

Pre terminated Drop Cable

Pre terminated Drop Cable

The optical fiber unit, Pre-terminated Drop Cable, is positioned in the center.Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides.Then,the cable is completed with a black or color LSZH sheath. It is also called leather cable. It is a new type of user access optical cable. According to the application environment and laying conditions, the cable structure and various technical parameters are reasonably designed. The characteristics of indoor soft cable and self-supporting optical cable are collected. Special equipment is used in conjunction with imported precision mold production. It is the best candidate for FTTX network solution, and it is also suitable for users of other fiber-optic FTTO and FTTB networks. Because the cross-section is like a butterfly, it is called a butterfly cable. Both sides are reinforcing members in the leather line and optical fibers in the middle.

READ MORE
Simplex Fiber Optic Cable

Simplex Fiber Optic Cable

Simplex indoor optical cable is made by evenly applying strands of aramid yarns as the strength member over tight buffer fibers and then is completed with a flame retardant sheath(CPR-Cca).

READ MORE
Singlemode Patch Cord

Singlemode Patch Cord

Fiber patch cords are fiber-optic cables with connectors on both ends that can be connected directly to a computer or other network device. Fiber patch cords are commonly used to connect light emitting devices, light receiving devices, and fiber optic terminal boxes. Single-mode fiber patch cord cores are particularly small in diameter, typically only 9 μm, and have only one light propagation path. It is for this reason that light can only be transmitted along the axis of the fiber, thereby completely avoiding the waste of dispersion and light energy.

READ MORE
CCOFC 25G SFP DAC optical module 3m compatible optical transceiver

CCOFC 25G SFP DAC optical module 3m compatible optical transceiver

SFP DAC Optical module, as one kind of optical transceiver assembly, a direct attach cable (DAC) is used to connect one mobility access switch with another when forming a stack, which can be either passive or active. Since the passive DAC contains no active components, it provides a direct electrical connection between corresponding cable ends. This process can also be done by an active DAC that is considered active because there are optics and/or electronics embedded within the connectors. Thus it helps to improve signal quality and provide a longer cable distance.

READ MORE
GYFTA53 fiber optic cable 24 core single mode fiber optic cable

GYFTA53 fiber optic cable 24 core single mode fiber optic cable

GYFTA53 cable, 250um, is positioned in a tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core.

READ MORE
JET Micro center bundle tube type non metal optical cable

JET Micro center bundle tube type non metal optical cable

J: Optical fiber tight covering structure, E: Elliptical shape, T: Filled structure JET outdoor fiber optic cable, 250μm, either of single-mode or multi-mode type, are positioned in a loose tube made of a high modulus plastic. The center of the cable core is a non-metallic reinforcing core (FRP) and reinforced core with water blocking yarn A layer of aramid yarn or high strength glass is applied around the cable core as additional strength member. The tubes are filled with a water-resistant filling compound. Then, the cable is completed with a black or color sheath.The original overhead line is used for long-distance communication and inter-office communication lines. Different types of aerial cables are suitable for hanging wire and self-supporting.

READ MORE
China supply SFP DWDM LC 80Km optical module

China supply SFP DWDM LC 80Km optical module

DWDM (DWDM: Dense Wavelength Division Multiplexing) is a combination of a set of optical wavelengths that can be transmitted by one fiber. DWDM SFP is a wavelength division multiplexing technology that can couple different wavelengths of light into a single-core fiber for transmission. The channel spacing of the DWDM SFP is 0.4 nm, 0.8 nm, 1.6 nm, etc., and the spacing is small, requiring additional wavelength control devices. A key advantage of the DWDM SFP is that its protocol and transmission speed are irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols, and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit different types of data traffic at different speeds on a single laser channel. From a QoS (Quality Service) perspective, DWDM-based networks respond quickly to customer bandwidth requirements and protocol changes in a cost-effective manner.

READ MORE
China factory 1310nm 40km optical sfp module transceiver manufacturer

China factory 1310nm 40km optical sfp module transceiver manufacturer

SFP Optical module is a compact optical transceiver module used in optical communications. The SFP transceiver modules are designed to support SONET/H, Fast Ethernet, Gigabit Ethernet, Fibre Channel and other communications standards. CCOFC manufactures and supplies a complete range of SFP transceiver modules which can be Customized. In addition . All of our SFP transceiver modules come with a lifetime advance replacement warranty and are 100% functionally tested. Fiber Optic Transceiver Module is a self-contained component that can both transmit and receive. Usually, it is inserted in devices such as routers or network interface cards which provide one or more transceiver module slot (e.g GBIC, SFP, XFP). CCOFC provide a full range of optical transceivers. All our fiber transceivers are 100% compatible with major brands . We also can customize optical transceivers to fit your specific requirements.

READ MORE