GPON-1280 Optical modem, WIFI dual-band wireless connection speed up to 300 Mbps at 24 GHz, and dual-band wireless speed up to 1200 Mbps, support 2/3 layer network protocol and high-quality voice transmission. GPON optical network terminals have reliability, good service quality assurance, manageability scalability and flexible networking features.The GPON standard is the ITU-TG.984 series of standards. The development of the GPON standard considers the support for traditional TDM services, and continues to adopt the 125ms fixed frame structure to maintain the 8K timing continuation. In order to support multiple protocols such as ATM, GPON defines a new package structure GEM:GPONEncapsulaTIonMethod. The data of ATM and other protocols can be mixed and encapsulated into frames.GPON is positioned in the telecom industry for multi-service, QoS-guaranteed full-service access needs, and strives to find an optimal, full-service, and most efficient solution, and proposes to "completely and thoroughly open all protocols." reconsider".READ MORE
The cat 6e network cable is an upgraded version of the Category 6 network cable, so it is also called “Enhanced Category 6 Network Cable” and complies with the standards of ISO/IEC 11801:2002 and EIA/TIA 568-B.2-1. The performance of the other aspects is better than the six types of network cables. Compared with the six types of network cables, the outer diameter of the cat 6e network cable is larger. The weight is heavier and the minimum bending radius is larger, and the maximum transmission distance of the super six types of network cables is 100m, and it can be compatible with the six types and super five types of network cables.The cat 6e network cables are shielded (UTP) and unshielded (FTP), and there are significant differences in structure between the two.
FTTH optical fiber terminal box, outdoor optical fiber terminal box is used in wiring connection between optical cable and optical communication equipment, through adapter in distribution box, optical fiber jumper leads optical signal, realize optical wiring function, and can meet the optical splitter placed to achieve spectral function.FTTH terminal box from Foclink is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for mini-network terminal distribution, in which the optical cables, patch cores or pigtails are connected.
The optical fiber unit, Pre-terminated Drop Cable, is positioned in the center.Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides.Then,the cable is completed with a black or color LSZH sheath. It is also called leather cable. It is a new type of user access optical cable. According to the application environment and laying conditions, the cable structure and various technical parameters are reasonably designed. The characteristics of indoor soft cable and self-supporting optical cable are collected. Special equipment is used in conjunction with imported precision mold production. It is the best candidate for FTTX network solution, and it is also suitable for users of other fiber-optic FTTO and FTTB networks. Because the cross-section is like a butterfly, it is called a butterfly cable. Both sides are reinforcing members in the leather line and optical fibers in the middle.
The SFP+ optical module is a new generation of 10 Gigabit optical modules that can meet Fibre Channel 8.5G and Ethernet 10G applications in accordance with the ANSI T11 protocol. The SFP+ is about 30% smaller than the previous XFP optical module, which looks the same as an ordinary 1-4G SFP optical module. SFP+ only retains the basic electro-optic and photoelectric conversion functions, which reduces the signal control functions of SerDes, CDR, EDC, MAC, etc. in the original XFP design, which simplifies the design of 10G optical modules and reduces power consumption. SFP+ has significant advantages such as high density, low power consumption and lower system construction cost. The products are widely used in the field of 10 Gigabit Ethernet fiber data communication, and are the mainstream products of 10 Gigabit modules.
The SFP+ DWDM optical module adopts an LC optical port and is compatible with IEEE802.3ae and SFF-8472. It has low power consumption, small size, and high speed. The SFP+DWDM optical module is capable of combining a set of optical wavelengths for transmission using one fiber. SFP+DWDM is a wavelength division multiplexing technology that can couple different wavelengths of light into a single-core fiber for transmission. SFP+DWDM requires less spacing and requires additional wavelength control devices. The advantage of SFP+DWDM is that its protocol and transmission speed are irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols, and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit different types of data traffic at different speeds on a single laser channel. Mainly used in data center interconnection, SONET/SDH, metropolitan area network, 4G LET wireless network, transmission network, high-speed point-to-point link, Fibre Channel and other environments.
2fiber, Figure-8 structure,900μm or 600μm tight buffer fiber, Aramid yarn, PVC jacket.Speak in detail, the figure-8fiber optic cable uses two Φ900μm or Φ600μm flame-retardant tight-fitting optical fibers as the optical transmission medium, and is covered with a layer of aramid as the force-strengthening unit, and extruded a layer of 8-shaped polyvinyl chloride (PVC) or low-smoke. Halogen-free material (LSZH, low-smoke, halogen-free, flame retardant) sheathed.
The 40G DAC Optical module is usually a cable assembly that is priced at a fixed length with fixed connectors on both ends. The connector used in the high-speed cable end has the same interface as the optical module, but the connector module on the high-speed cable does not have expensive optical lasers and other electronic components compared to the optical module, thereby greatly saving in short-distance applications. Cost and power consumption, a cost-effective, high-speed data communication solution that replaces optical modules, can be widely used in storage area networks, data centers, and high-performance computer connections by connecting switches to routers or servers.