The Dome Type Splice Closure is made of high quality engineering plastic. Provides different port types, accessories, and different fiber core number optical connector closures for the fiber. The main applications for vertical fiber optic connector closures are cable television, telecommunications, and fiber optic networks. They are suitable for fiber optic connector protection in both straight-through and branch applications and can be used in antenna, pipe and direct-buried fiber optic cable projects. Dome Type Splice Closure provides with 4 fiber cable in-out round ports and the cable diameter is from ψ7-ψ18. it is widely applied to the splicing and distributing variable optical cables. This product is made of ABS and with the mechanical sealing structure filled with the sealing material. The external component and fastening piece are all made of the high-quality iron. It can be opened after sealing.
Fiber optic adapters, also known as fiber optic couplers, are a special type of passive component designed to fit or connect the ends of a fiber optic cable with high precision. They are sometimes named as matching sleeves and hybrid adapters. The mating sleeve means that the fiber optic adapter is used to connect the same type of fiber optic connector, and the hybrid adapter is the type of fiber optic adapter used to connect different types of fiber optic connectors. The fiber adapter is paired with two ends of different fiber connectors to realize conversion between different connectors FC, SC, ST, LC, MTRJ, MPO, E2000, and the like. They are widely used in optical distribution frames (ODF), fiber optic communication equipment and equipment, with excellent performance and good stability.
GPON-1080 optical modem constructed as a FTTH network conforms to the ITU-T G.984 standard, GPON optical network terminals are characterized by reliability, good service quality assurance, manageability, scalability and flexible networking. Can meet the access requirement of high-speed broadband.
GY: Outdoor (field) optical cable for communication T: Filled structure S: Steel strip--polyethylene bonding sheath GYTS cable is a communication cable with a similar optical transmission speed. The 250 μm fiber is located in a loose tube made of high modulus plastic. The tube is filled with a waterproof filling compound. The center of the core is a metal reinforcement.
GY: Outdoor optical cable for communication F: Non-metallic reinforcing member T: Filled structure A: Aluminum-polyethylene bonding layer The GYFTA fiber is single/multi mode fiber, stranded loose tube cable with aluminum and steel tape. It can be used for duct and direct buried application. Particularly suitable for occasions where good mechanical properties and rodent resistance are expected.
"GY" means outdoor optical cable for communication, "F" means non-metallic reinforcing member, "T" means ointment filling structure, "Y" means polyethylene sheath. GYFTY is positioned in a loose tube made of a high modulus plastic. At the center of the core is a fiberglass reinforced plastic (FRP), and the loose tube (and the filling rope) is twisted around the central reinforcing core into a compact and round core with a gap in the core filled with a water-blocking filler. The outer core of the cable is extruded with a polyethylene inner sheath to form a cable.
BIDI-SFP optical module: BiDi (Bidirectional): single fiber bidirectional. It uses WDM (ie, wavelength division multiplexing) technology to transmit and receive different center wavelengths in two directions, thereby realizing a bidirectional transmission of optical signals in one fiber. A general optical module has two ports, a TX transmitting port and an RX receiving port, and the BIDI optical module has only one port, which is filtered by a filter in the optical module, and simultaneously performs transmission of a 1310 nm optical signal and reception of a 1550 nm optical signal, or in contrast. Therefore, BIDI modules must be used in pairs. It is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of switches and routers, can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.
The Horizontal Type Splice Closure is a mechanical pressure seal joint system, which is a joint protection device that provides optical, sealing and mechanical strength continuity between adjacent cables. It is mainly used for straight-through and branch connection of overhead, pipeline, direct burial and other laying methods applicable to various structural optical cables. The box body is made of reinforced plastic, high strength and corrosion resistance. The splice closure is suitable for connection in the terminal room of the structural fiber optic cable. The structure is mature, the seal is reliable, and the construction is convenient. Widely used in communications, network systems, CATV cable TV, fiber optic cable network systems, and more.