The Horizontal Type Splice Closure is a mechanical pressure seal joint system, which is a joint protection device that provides optical, sealing and mechanical strength continuity between adjacent cables. It is mainly used for straight-through and branch connection of overhead, pipeline, direct burial and other laying methods applicable to various structural optical cables. The box body is made of reinforced plastic, high strength and corrosion resistance. The splice closure is suitable for connection in the terminal room of the structural fiber optic cable. The structure is mature, the seal is reliable, and the construction is convenient. Widely used in communications, network systems, CATV cable TV, fiber optic cable network systems, and more.
2fiber, Figure-8 structure,900μm or 600μm tight buffer fiber, Aramid yarn, PVC jacket.Speak in detail, the figure-8fiber optic cable uses two Φ900μm or Φ600μm flame-retardant tight-fitting optical fibers as the optical transmission medium, and is covered with a layer of aramid as the force-strengthening unit, and extruded a layer of 8-shaped polyvinyl chloride (PVC) or low-smoke. Halogen-free material (LSZH, low-smoke, halogen-free, flame retardant) sheathed.
GPON-4081 Optical modem is the abbreviation of modulator and demodulator. Chinese called modem (known as the data machine in Hong Kong and Taiwan). According to the homophonic sound of Modem, it is called "cat" relatives. It is a device that converts a digital signal into an analog signal by modulation at the transmitting end and converts the analog signal into a digital signal by demodulating at the receiving end. The so-called modulation is to convert the digital signal into an analog signal transmitted on the telephone line; demodulation, that is, converting the analog signal into a digital signal. The so-called modem. The English language of the modem is MODEM, which is used as a "translator" for analog signals and digital signals.
Description of this EOC 4050 Optical modem EOC-4050 Optical modem, as an Ethernet coaxial terminal product, it supports four 100M Ethernet networks and works with EOC master in Ethernet over coax net
GY: Outdoor (field) optical cable for communication T: Filled structure Y: Polyethylene 5: Wrinkled steel strip 3: Polyethylene sheath Fiber optic cable GYTY53, 2~144 fiber, central strength member (steel), jelly filled, fiber-containing loose tube and PP filler (if necessary) stranded, water blocking tape, PE inner sheath, longitudinally covered copolymer coated steel Belt, PE sheath. It has two different types: single-mode GYTY53 cable and multi-mode GYTY53 cable.
100G AOC active optical cable refers to a communication cable that needs to use external energy to convert electrical signals into optical signals or convert optical signals into electrical signals. The optical transceivers at both ends of the optical cable provide photoelectric conversion and optical transmission functions. And the transmission rate reaches 100Gb/s. 100G AOC Optical module This module has a photoelectric conversion device inside, which can convert electrical signals into optical signals with a transmission distance of up to 100 meters. The product has one to four channels, each with a transmission rate of 25.3125 Gb / s and a rate of 100 Gb / s. Its low power consumption, low bit error rate, easy management, high performance, etc. are widely used in short-distance high-speed connections, such as 100 Gigabit Ethernet, 100 Gigabit switches, 100 Gigabit servers, supercomputers, cloud computing and cloud storage.
The SFP+CWDM optical module is a low-cost WDM transmission technology for the access layer of the metropolitan area network. The SFP+CWDM optical module adopts CWDM technology, which can combine optical signals of different wavelengths and transmit them through one optical fiber through an external wavelength division multiplexer, thereby saving fiber resources. At the same time, the receiving end needs to decompose the complex optical signal using a wave decomposition multiplexer. The SFP+CWDM optical module is divided into 18 bands, from 1270nm to 1610nm, separated by 20nm between each two bands.
Pre-terminated high-precision MPO/MTP patch cord can achieve multi-fiber connectivity. It also can be used for internal frame cabling. MPO/MTP multi-fiber cabling system is ideally suited for a high density environment that demands space saving and innovative cable management solutions. The spring - loaded push/pull locking mechanism of the MPO is easy to handle while guaranteeing the secure mating of the connectors. High- precision guiding pins ensure the exact adjustment of the ferrule. t offered in fiber types in standard 8, 12, 24 or 48 cores versions using a compact , and with multimode and singlemode fibres secure transition between MPO/MTP and LC or SC connections.READ MORE