Professional fiber manufacturer from Guangdong province, China. The structure of GYTA53 optical cable is to insert a single-mode or multi-mode optical fiber into a loose tube made of a high modulus polyester material, and the casing is filled with a waterproof compound. A fiber reinforced plastic (FRP) locates in the center of core as a non-metallic strength member.
Micro Type Splitter is highly protective for fiber optic lines and is the result of miniaturization of cassette optical splitters. It is mainly used in various types of wiring boxes or cabinets, and is an intermediate choice for compact size and reliable fiber protection. Micro Type Splitter, planar waveguide light optical distributor (PLC Splitter), is a kind of planar waveguide integrated optical device, it can be 1260nm ~ 1650nm such a wide range of wavelengths of light power reservation in realization, the distribution of wavelength range covers EPON technology used 1310nm, 1490nm and 1550nm three wavelengths. Especially suitable for EPON Ethernet passive optical network access technology FTTP fiber network system, broadband passive optical optical distributor (POS) use. Including 1x2, 1x4, 1x8, 1x16, 1x32, 1x64, and 2x2, 2X4, 2X8, 2X16, 2X32, 2X64 type.
100G AOC active optical cable refers to a communication cable that needs to use external energy to convert electrical signals into optical signals or convert optical signals into electrical signals. The optical transceivers at both ends of the optical cable provide photoelectric conversion and optical transmission functions. And the transmission rate reaches 100Gb/s. 100G AOC Optical module This module has a photoelectric conversion device inside, which can convert electrical signals into optical signals with a transmission distance of up to 100 meters. The product has one to four channels, each with a transmission rate of 25.3125 Gb / s and a rate of 100 Gb / s. Its low power consumption, low bit error rate, easy management, high performance, etc. are widely used in short-distance high-speed connections, such as 100 Gigabit Ethernet, 100 Gigabit switches, 100 Gigabit servers, supercomputers, cloud computing and cloud storage.
The 40G optical module refers to an optical module with a transmission rate of 40 Gbps. CFP and QSFP are the main package types, and the 40G QSFP optical module is one of the most widely used. The 40G QSFP+ optical module is typically used with LC single-mode fiber patch cords for transmission distances up to 10km, and it has four data channels that simultaneously transmit data. It works by the laser driver controlling the wavelength of arrival, and the optical signals are then multiplexed and combined for transmission. When the receiver arrives at the receiving end, the transmitted signals are decomposed into four channels with a transmission rate of 10 Gbps, and then the PIN detector or transimpedance amplifier recovers the data stream and then transmits the optical signal.
The SFP+ optical module is a new generation of 10 Gigabit optical modules that can meet Fibre Channel 8.5G and Ethernet 10G applications in accordance with the ANSI T11 protocol. The SFP+ is about 30% smaller than the previous XFP optical module, which looks the same as an ordinary 1-4G SFP optical module. SFP+ only retains the basic electro-optic and photoelectric conversion functions, which reduces the signal control functions of SerDes, CDR, EDC, MAC, etc. in the original XFP design, which simplifies the design of 10G optical modules and reduces power consumption. SFP+ has significant advantages such as high density, low power consumption and lower system construction cost. The products are widely used in the field of 10 Gigabit Ethernet fiber data communication, and are the mainstream products of 10 Gigabit modules.
Fluke passed and Factory lowest price UTP CAT6 Ethernet cable/Network cable 4Pr 24 AWG BC/CCA/CCS/CCAG 305m/roll wholesale CCOFC factory is a professional manufacturer in producing Cat6 UTP/FTP/SFTP/STP/SFFTP/FFTP network cable, Power cable, Coaxial cable, Telephone cable etc. The cat6 network cable are applied to the wiring between the user communication terminal of the residential integrated wiring system and the distribution frame and the distribution frame between the communication terminal of the work area and the junction between the distribution wiring system, and are suitable for high-speed local area network, which is suitable for 240MHz channel bandwidth communication. The cross-shaped conductor divider design enhances near-end crosstalk and impedance performance, increasing bandwidth and signal-to-noise margin.
Breakout fiber patch cord is used to split 12-core MTP connectors terminated on trunk cable into simplex or duplex connectors. MPO/MTP connector is connected with trunk cable, while simplex or duplex connector on the other side can provide a different fan-out length which is convenient for device connection. Can also say this breakout patch cord is a fiber optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch, or other telecommunication equipment. Having a thick layer of protection, it is used to connect the optical transmitter, receiver, and the terminal box. This is known as "interconnect-style cabling".READ MORE
Description of this QSFP AOC 40G Active Optical Cable fiber cable optical transceiver module manufacturer 40G QSFP+ AOC Optical module 40G QSFP+ AOC Optical module, QSFP + Active Optical Cables (AOCs