Call us at +86 13377766112

Products: Horizontal Type Splice Closure

Horizontal Type Splice Closure

Horizontal Type Splice Closure

The Horizontal Type Splice Closure is a mechanical pressure seal joint system, which is a joint protection device that provides optical, sealing and mechanical strength continuity between adjacent cables. It is mainly used for straight-through and branch connection of overhead, pipeline, direct burial and other laying methods applicable to various structural optical cables. The box body is made of reinforced plastic, high strength and corrosion resistance. The splice closure is suitable for connection in the terminal room of the structural fiber optic cable. The structure is mature, the seal is reliable, and the construction is convenient. Widely used in communications, network systems, CATV cable TV, fiber optic cable network systems, and more.

READ MORE
Indoor communication equipment C220 Fiber Optic Cabinet

Indoor communication equipment C220 Fiber Optic Cabinet

C220 fiber optic cabinet is a high capacity and high density fiber distribution frame, suitable for the composition and distribution of fibers in optical access network to achieve the fiber optic lines connection, distribution and scheduling. Advanced fiber optic cabling management design to ensure easy installation, construction and maintenance of fiber optic cables and cores. It has the characteristics of beautiful appearance, strong dustproof and anti-interference, and good anti-corrosion performance.

READ MORE
Stranded Layer Non Armored Ribbon Fiber GYFDTA

Stranded Layer Non Armored Ribbon Fiber GYFDTA

GYFDTA uses FRP as the central strength member ensures good tensile resistance,and improves the bending performance.The middle layer of aramid yarn increases the tensile strength of the cable. It has excellent moisture resistance ability:the loose tube is filled with grease to protect the fiber, APL tape prevent the water ingress, then the cable is completed with PE out sheath. It's suitable for aerial and duct application. Because of the good moisture resistance, it can also be used in cable trench. It has the loose tube structure with ribbon cable, which is surrounded by the APL tape. GYFDTA is a good option for interoffice communication,outdoor access network

READ MORE
GPON 4081 Optical modem

GPON 4081 Optical modem

GPON-4081 Optical modem is the abbreviation of modulator and demodulator. Chinese called modem (known as the data machine in Hong Kong and Taiwan). According to the homophonic sound of Modem, it is called "cat" relatives. It is a device that converts a digital signal into an analog signal by modulation at the transmitting end and converts the analog signal into a digital signal by demodulating at the receiving end. The so-called modulation is to convert the digital signal into an analog signal transmitted on the telephone line; demodulation, that is, converting the analog signal into a digital signal. The so-called modem. The English language of the modem is MODEM, which is used as a "translator" for analog signals and digital signals.

READ MORE
CCOFC 25G SFP DAC optical module 3m compatible optical transceiver

CCOFC 25G SFP DAC optical module 3m compatible optical transceiver

SFP DAC Optical module, as one kind of optical transceiver assembly, a direct attach cable (DAC) is used to connect one mobility access switch with another when forming a stack, which can be either passive or active. Since the passive DAC contains no active components, it provides a direct electrical connection between corresponding cable ends. This process can also be done by an active DAC that is considered active because there are optics and/or electronics embedded within the connectors. Thus it helps to improve signal quality and provide a longer cable distance.

READ MORE
Stranded Layer Armored Ribbon Fiber GYDTA

Stranded Layer Armored Ribbon Fiber GYDTA

GYDTA uses steel as the central strength member ensures good tensile resistance,and improves the bending performance. It has excellent moisture resistance ability:the loose tube is filled with grease to protect the fiber, APL tape prevent the water ingress, then the cable is completed with PE out sheath. It's suitable for aerial and duct application. Because of the good moisture resistance, it can also be used in cable trench. It has the loose tube structure with ribbon cable, which is surrounded by the APL tape. GYDTA is a good option for interoffice communication,outdoor access network.

READ MORE
Pre terminated Drop Cable

Pre terminated Drop Cable

The optical fiber unit, Pre-terminated Drop Cable, is positioned in the center.Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides.Then,the cable is completed with a black or color LSZH sheath. It is also called leather cable. It is a new type of user access optical cable. According to the application environment and laying conditions, the cable structure and various technical parameters are reasonably designed. The characteristics of indoor soft cable and self-supporting optical cable are collected. Special equipment is used in conjunction with imported precision mold production. It is the best candidate for FTTX network solution, and it is also suitable for users of other fiber-optic FTTO and FTTB networks. Because the cross-section is like a butterfly, it is called a butterfly cable. Both sides are reinforcing members in the leather line and optical fibers in the middle.

READ MORE
GYTY53 digital fiber optic cable

GYTY53 digital fiber optic cable

GY: Outdoor (field) optical cable for communication T: Filled structure Y: Polyethylene 5: Wrinkled steel strip 3: Polyethylene sheath Fiber optic cable GYTY53, 2~144 fiber, central strength member (steel), jelly filled, fiber-containing loose tube and PP filler (if necessary) stranded, water blocking tape, PE inner sheath, longitudinally covered copolymer coated steel Belt, PE sheath. It has two different types: single-mode GYTY53 cable and multi-mode GYTY53 cable.

READ MORE