The Insert Type PLC Splitters is branching devices that is used to distribute optical signals to multiple locations for processing. In optical networks, it is often necessary to split an optical signal into many identical signals, or to combine many signals into a single signal. PLC Splitter (Planar lightwave circuit splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. They are designed for FTTx Passive Optical Networks, CWDM, DWDM and optical cable TV System. PLC Splitter is responsible to distribute optical signals from Central Office (CO) to multiple premise locations.We provides whole series of 1*N and 2*N splitter products that are tailored for specific applications. All prodcts meet GR-1209-CORE-2001 and GR-1221-CORE-1999 requirements.
The 100G QSFp Optical Module integrates the receiver and transmitter paths on one module. At the transmitting end, the four channels of serial data are recovered, retimed, and passed to the four laser drivers. The laser driver controls a 4-distributed feedback laser (DFB) with center wavelengths of 1296 nm, 1300 nm, 1305 nm, and 1309 nm. The optical signal is multiplexed to a single mode fiber through an industry standard LC connector. On the receiving side, the four optical data stream channels are optically demultiplexed by an integrated optical demultiplexer. Each data stream is recovered by the PIN photodetector and transimpedance amplifier and retimed. The module features a hot-swappable electrical interface, low power consumption and MDIO management interface. Designed according to the QSFP Multi-Source Agreement (MSA), the product features a form factor, optical/electrical connection and digital diagnostic interface, and is compliant with the IEEE 802.3bm standard.
This kind of cable use bare copper to be the center conduction with the Specification is 24AWG and PE to be the dielectric. The jacket is made of Fireproof material, which is so meanful to the Cat5e communication. This Cat5e SFTP cable is conform to the SIO/IEC, TIA/EIA and EN standards. And the electrical characteristics are exceed the lastest Cat5e standards.
OC144-Cross Connecting Cabinet is an outdoor optical equipment that is especially designed for outdoor optical nodes in access net work. The cabinet has the functions of optical fiber cable splice, distribution, splitter holding, storage and dispatch. It has great performance of resisting the open-air environment and can resist severe climatic changes and serious working environment. The protection grade reaches IP65.
"GY" means Outdoor optical cable for communication,"T" means Filled structure,"A" means Aluminum belt--polyethylene bonding layer. The GYTA cable is a loose tube made of a high-modulus material, which is filled with a 250 μm fiber. And the loose tube is filled with a waterproof compound. The center of the core is a metal reinforced core. For some cores, a layer of polyethylene (PE) is required to be extruded outside the metal reinforced core.
OC240-Cross Connecting Cabinet is use for outdoor cable access network, backbone cable and indoor cable arrangement. it with high-capacity, high-density fiber distribution tray, suitable for the composition, splice and distribution of fibers in optical access network to achieve the fiber optic lines connection, distribution and scheduling.The oc240-cross connecting cabinet is a kind of outdoor cabinet. It refers to a cabinet made of metal or non-metal materials directly under the influence of natural weather. It does not allow unauthorised operators to enter the operating cabinet, providing wireless communication stations or wired network station workstations.
GPON-4081 Optical modem is the abbreviation of modulator and demodulator. Chinese called modem (known as the data machine in Hong Kong and Taiwan). According to the homophonic sound of Modem, it is called "cat" relatives. It is a device that converts a digital signal into an analog signal by modulation at the transmitting end and converts the analog signal into a digital signal by demodulating at the receiving end. The so-called modulation is to convert the digital signal into an analog signal transmitted on the telephone line; demodulation, that is, converting the analog signal into a digital signal. The so-called modem. The English language of the modem is MODEM, which is used as a "translator" for analog signals and digital signals.
Fiber optic patch panel is modulized design with Swing tray inside.Each Swing tray can splice 24fibers. It could be pre-installed with various kinds of fiber optic adapters and pigtails. It is ideal for indoor fiber optic cables connection storage, distribution and management.