The Dome Type Splice Closure is made of high quality engineering plastic. Provides different port types, accessories, and different fiber core number optical connector closures for the fiber. The main applications for vertical fiber optic connector closures are cable television, telecommunications, and fiber optic networks. They are suitable for fiber optic connector protection in both straight-through and branch applications and can be used in antenna, pipe and direct-buried fiber optic cable projects. Dome Type Splice Closure provides with 4 fiber cable in-out round ports and the cable diameter is from ψ7-ψ18. it is widely applied to the splicing and distributing variable optical cables. This product is made of ABS and with the mechanical sealing structure filled with the sealing material. The external component and fastening piece are all made of the high-quality iron. It can be opened after sealing.
ADSS cable, the all-media self-supporting optical cable is a non-metallic optical cable which is composed entirely of dielectric materials and contains the necessary support system and can be directly suspended on the power pole. Fibers, 250μm, are positioned in a loose tube made of a high modulus plastics. The tubes are filled with a water-resistant filling compound.
Planar lightwave circuit PLC splitter is a type of optical power management device that is fabricated using silica optical waveguide technology.It features small size,high reliability,wide operating wavelength range and good channel-to-channel uniformity,and is widely used in PON networks to realize optical signal power splitting. Bare PLC splitter is putting PLC splitter chip and input, output optical fiber array in a square metal tube, out with the diameter of 0.9mm or 250um bare fiber ,fiber can be welded, can also be processing various types of optical fiber connector. We provides whole series of 1*N and 2*N splitter products that are tailored for specific applications.All products meet "YD/T1117-2001 All optical fiber branching device technical conditions","YD-T 2000-209 PLC Integrated optical devices PLC optical power splitter"etc, and are certified by TLC for network deployment.
The optical network terminal product, GPON-1281 Optical modem, constructed as a FTTH network conforms to the ITU-T G.984 standard, WIFI dual- band wireless connection speeds of up to 300 Mbps on 24 GHz .and has dual-band wireless speeds up to 1200 Mbps, supporting 2/3 layer network protocols and high- quality voice transmission. GPON optical network terminals are characterized by reliability, good service quality assurance, manageability scalability, and flexible networking. Can meet data, data + voice, data + voice + WIFI and other access needs.
SFP DAC Optical module, as one kind of optical transceiver assembly, a direct attach cable (DAC) is used to connect one mobility access switch with another when forming a stack, which can be either passive or active. Since the passive DAC contains no active components, it provides a direct electrical connection between corresponding cable ends. This process can also be done by an active DAC that is considered active because there are optics and/or electronics embedded within the connectors. Thus it helps to improve signal quality and provide a longer cable distance.
"GY" means Outdoor optical cable for communication,"T" means Filled structure,"A" means Aluminum belt--polyethylene bonding layer. The GYTA cable is a loose tube made of a high-modulus material, which is filled with a 250 μm fiber. And the loose tube is filled with a waterproof compound. The center of the core is a metal reinforced core. For some cores, a layer of polyethylene (PE) is required to be extruded outside the metal reinforced core.
J: Optical fiber tight covering structure, E: Elliptical shape, T: Filled structure JET outdoor fiber optic cable, 250μm, either of single-mode or multi-mode type, are positioned in a loose tube made of a high modulus plastic. The center of the cable core is a non-metallic reinforcing core (FRP) and reinforced core with water blocking yarn A layer of aramid yarn or high strength glass is applied around the cable core as additional strength member. The tubes are filled with a water-resistant filling compound. Then, the cable is completed with a black or color sheath.The original overhead line is used for long-distance communication and inter-office communication lines. Different types of aerial cables are suitable for hanging wire and self-supporting.
Description of this 100km CWDM SFP 10G module compatible optical module SFP CWDM Optical module CWDM SFP optical module is a low-cost WDM transmission technology for the access layer of the metropoli