The cat 6e network cable is an upgraded version of the Category 6 network cable, so it is also called “Enhanced Category 6 Network Cable” and complies with the standards of ISO/IEC 11801:2002 and EIA/TIA 568-B.2-1. The performance of the other aspects is better than the six types of network cables. Compared with the six types of network cables, the outer diameter of the cat 6e network cable is larger. The weight is heavier and the minimum bending radius is larger, and the maximum transmission distance of the super six types of network cables is 100m, and it can be compatible with the six types and super five types of network cables.The cat 6e network cables are shielded (UTP) and unshielded (FTP), and there are significant differences in structure between the two.
Small size, reasonable design for cable protection ABS plastic material, white and black color available 2 cable port (1 in 1 out) diameter 8.0mm Inside 6 fiber slot for max. 12 fibers splicing. With fixing cable strengthen core parts Wall mounted, aerial hang application Dust-proof and waterproof, IP65.
The optical fiber unit, Pre-terminated Drop Cable, is positioned in the center.Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides.Then,the cable is completed with a black or color LSZH sheath. It is also called leather cable. It is a new type of user access optical cable. According to the application environment and laying conditions, the cable structure and various technical parameters are reasonably designed. The characteristics of indoor soft cable and self-supporting optical cable are collected. Special equipment is used in conjunction with imported precision mold production. It is the best candidate for FTTX network solution, and it is also suitable for users of other fiber-optic FTTO and FTTB networks. Because the cross-section is like a butterfly, it is called a butterfly cable. Both sides are reinforcing members in the leather line and optical fibers in the middle.
The Insert Type PLC Splitters is branching devices that is used to distribute optical signals to multiple locations for processing. In optical networks, it is often necessary to split an optical signal into many identical signals, or to combine many signals into a single signal. PLC Splitter (Planar lightwave circuit splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. They are designed for FTTx Passive Optical Networks, CWDM, DWDM and optical cable TV System. PLC Splitter is responsible to distribute optical signals from Central Office (CO) to multiple premise locations.We provides whole series of 1*N and 2*N splitter products that are tailored for specific applications. All prodcts meet GR-1209-CORE-2001 and GR-1221-CORE-1999 requirements.
Planar lightwave circuit PLC splitter is a type of optical power management device that is fabricated using silica optical waveguide technology.It features small size,high reliability,wide operating wavelength range and good channel-to-channel uniformity,and is widely used in PON networks to realize optical signal power splitting. Bare PLC splitter is putting PLC splitter chip and input, output optical fiber array in a square metal tube, out with the diameter of 0.9mm or 250um bare fiber ,fiber can be welded, can also be processing various types of optical fiber connector. We provides whole series of 1*N and 2*N splitter products that are tailored for specific applications.All products meet "YD/T1117-2001 All optical fiber branching device technical conditions","YD-T 2000-209 PLC Integrated optical devices PLC optical power splitter"etc, and are certified by TLC for network deployment.
The SFP+ DWDM optical module adopts an LC optical port and is compatible with IEEE802.3ae and SFF-8472. It has low power consumption, small size, and high speed. The SFP+DWDM optical module is capable of combining a set of optical wavelengths for transmission using one fiber. SFP+DWDM is a wavelength division multiplexing technology that can couple different wavelengths of light into a single-core fiber for transmission. SFP+DWDM requires less spacing and requires additional wavelength control devices. The advantage of SFP+DWDM is that its protocol and transmission speed are irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols, and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit different types of data traffic at different speeds on a single laser channel. Mainly used in data center interconnection, SONET/SDH, metropolitan area network, 4G LET wireless network, transmission network, high-speed point-to-point link, Fibre Channel and other environments.
The Dome Type Splice Closure is made of high quality engineering plastic. Provides different port types, accessories, and different fiber core number optical connector closures for the fiber. The main applications for vertical fiber optic connector closures are cable television, telecommunications, and fiber optic networks. They are suitable for fiber optic connector protection in both straight-through and branch applications and can be used in antenna, pipe and direct-buried fiber optic cable projects. Dome Type Splice Closure provides with 4 fiber cable in-out round ports and the cable diameter is from ψ7-ψ18. it is widely applied to the splicing and distributing variable optical cables. This product is made of ABS and with the mechanical sealing structure filled with the sealing material. The external component and fastening piece are all made of the high-quality iron. It can be opened after sealing.
Fluke passed and Factory lowest price UTP CAT6 Ethernet cable/Network cable 4Pr 24 AWG BC/CCA/CCS/CCAG 305m/roll wholesale CCOFC factory is a professional manufacturer in producing Cat6 UTP/FTP/SFTP/STP/SFFTP/FFTP network cable, Power cable, Coaxial cable, Telephone cable etc. The cat6 network cable are applied to the wiring between the user communication terminal of the residential integrated wiring system and the distribution frame and the distribution frame between the communication terminal of the work area and the junction between the distribution wiring system, and are suitable for high-speed local area network, which is suitable for 240MHz channel bandwidth communication. The cross-shaped conductor divider design enhances near-end crosstalk and impedance performance, increasing bandwidth and signal-to-noise margin.