The Dome Type Splice Closure is made of high quality engineering plastic. Provides different port types, accessories, and different fiber core number optical connector closures for the fiber. The main applications for vertical fiber optic connector closures are cable television, telecommunications, and fiber optic networks. They are suitable for fiber optic connector protection in both straight-through and branch applications and can be used in antenna, pipe and direct-buried fiber optic cable projects. Dome Type Splice Closure provides with 4 fiber cable in-out round ports and the cable diameter is from ψ7-ψ18. it is widely applied to the splicing and distributing variable optical cables. This product is made of ABS and with the mechanical sealing structure filled with the sealing material. The external component and fastening piece are all made of the high-quality iron. It can be opened after sealing.
The 40G optical module refers to an optical module with a transmission rate of 40 Gbps. CFP and QSFP are the main package types, and the 40G QSFP optical module is one of the most widely used. The 40G QSFP+ optical module is typically used with LC single-mode fiber patch cords for transmission distances up to 10km, and it has four data channels that simultaneously transmit data. It works by the laser driver controlling the wavelength of arrival, and the optical signals are then multiplexed and combined for transmission. When the receiver arrives at the receiving end, the transmitted signals are decomposed into four channels with a transmission rate of 10 Gbps, and then the PIN detector or transimpedance amplifier recovers the data stream and then transmits the optical signal.
The Insert Type PLC Splitters is branching devices that is used to distribute optical signals to multiple locations for processing. In optical networks, it is often necessary to split an optical signal into many identical signals, or to combine many signals into a single signal. PLC Splitter (Planar lightwave circuit splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. They are designed for FTTx Passive Optical Networks, CWDM, DWDM and optical cable TV System. PLC Splitter is responsible to distribute optical signals from Central Office (CO) to multiple premise locations.We provides whole series of 1*N and 2*N splitter products that are tailored for specific applications. All prodcts meet GR-1209-CORE-2001 and GR-1221-CORE-1999 requirements.
The fiber distribution box is suitable for the wiring connection between the optical cable and the optical communication equipment. The optical signal is extracted by the optical jumper through the adapter in the wiring box to realize the optical wiring function. It is suitable for the protective connection of fiber optic cable and wiring pigtail. It is also suitable for fiber termination point in fiber access network. This product is applied to the terminal access link in the FTTH access system, outdoor wall-mounted or hoop-mounted. The uplink is connected to the distribution cable, and the downstream cable is connected to the home, and the introduction and fixation of the optical cable, the welding of the optical fiber, and the installation and management of the optical splitter are completed, thereby realizing the splitting of the optical line.
Micro Type Splitter is highly protective for fiber optic lines and is the result of miniaturization of cassette optical splitters. It is mainly used in various types of wiring boxes or cabinets, and is an intermediate choice for compact size and reliable fiber protection. Micro Type Splitter, planar waveguide light optical distributor (PLC Splitter), is a kind of planar waveguide integrated optical device, it can be 1260nm ~ 1650nm such a wide range of wavelengths of light power reservation in realization, the distribution of wavelength range covers EPON technology used 1310nm, 1490nm and 1550nm three wavelengths. Especially suitable for EPON Ethernet passive optical network access technology FTTP fiber network system, broadband passive optical optical distributor (POS) use. Including 1x2, 1x4, 1x8, 1x16, 1x32, 1x64, and 2x2, 2X4, 2X8, 2X16, 2X32, 2X64 type.
The EPON-4081 Opical modem is a type of optical modem. The optical modem refers to a transceiver that converts the optical Ethernet signal into other protocol signals. The optical cat is also called a single-port optical transceiver. It is a product designed for a special user environment. A single E1 or single V.35 or single 10BaseT point-to-point optical transmission terminal device using a pair of optical fibers. EPON-4081 Opical modem, as an optical network terminal product built by FTTH network, the product complies with IEEE802.3ah , WiFi dual-band wireless connection speeds of up to 300 Mbps on 24 GHz, and Has high-quality EPON access capability. The EPON ONU optical network terminal has the characteristics of high reliability, good service quality assurance, manageability,scalability, and flexible networking, which can meet the requirements of high- speed broadband access.
GPON-4081 Optical modem is the abbreviation of modulator and demodulator. Chinese called modem (known as the data machine in Hong Kong and Taiwan). According to the homophonic sound of Modem, it is called "cat" relatives. It is a device that converts a digital signal into an analog signal by modulation at the transmitting end and converts the analog signal into a digital signal by demodulating at the receiving end. The so-called modulation is to convert the digital signal into an analog signal transmitted on the telephone line; demodulation, that is, converting the analog signal into a digital signal. The so-called modem. The English language of the modem is MODEM, which is used as a "translator" for analog signals and digital signals.
Optical Fiber Information Panel, the indoor 85mm type FTTH mini fiber optic faceplate employs a compact plug-in design, combines a modern design concept, adopts imported plastic, is of a graceful appearance and applicable for FTTH, FTTO and FTTD, etc., and allows easy use in different instalation environments.The clasp design of the cover has greatly reduced the istallation strength. It is very thin and matches with other A86 panels in homes, and also meet the open or concealed cabling for optical cables. Coordinating with FC strip-type optical adaptor, it generates more options in term of fiber interfaces for users, all SC, LC and SC/FC are usable. In addition, the big diameter wrapping post in the box protects radically in an omnibearing way the optical fiber in the box.