Call us at +86 13377766112

Products: Richerlink optical network modem

GPON 2480 Optical modem

GPON 2480 Optical modem

GPON-2480 Optical modem are manufactured and developed by ccofc company, which is a leader in FTTH/ FTTO broadband access network field. They are properly manageable added with features such as high-bandwidth, high reliability, low power consumption and satisfy the users requirement to access broadband, voice, data and video etc. The optical network terminal product constructed as a FTTH network conforms to the ITU-T G.984 standard, and has dual-band wireless speeds up to 1200 Mbps, supporting LC/L3 layer network protocols and high-quality voice transmission.

READ MORE
Self supporting Pre terminated Drop Cable

Self supporting Pre terminated Drop Cable

The structure of the self-supporting pre-terminated drop cable is based on the Butterfly cable, and a metal suspension unit is added. With the continuous extension of the optical fiber like the user end, in order to meet the different uses and requirements, and expand the use range of the butterfly-introducing cable, on the basis of the Pre-terminated Drop Cable, a derivative product of the butterfly-introducing has emerged, the most typical one being The Self-supporting Pre-terminated Drop Cable is introduced into the optical cable.

READ MORE
Telecom communication Cable 5 types of network Cable factory

Telecom communication Cable 5 types of network Cable factory

Cat5 is a twisted pair cable used in computer networks. It is also a multimedia cable used in information and voice services such as data and voice. It is widely used in Ethernet and broadband access projects. Its quality is directly and inferior. It is related to the transmission quality of information communication. However, due to the development of optical fiber and communication technology, the impact of twisted pair on communication quality is also gradually reduced.The cat5 network cable will be marked with the word "CAT5" and the transmission bandwidth is 100MHz. It is used for voice transmission and data transmission with a maximum transmission rate of 100Mbps.

READ MORE
China Supplier outdoors ADSS fiber optic cable

China Supplier outdoors ADSS fiber optic cable

ADSS cable, the all-media self-supporting optical cable is a non-metallic optical cable which is composed entirely of dielectric materials and contains the necessary support system and can be directly suspended on the power pole. Fibers, 250μm, are positioned in a loose tube made of a high modulus plastics. The tubes are filled with a water-resistant filling compound.

READ MORE
Optical Fiber Patch Panel

Optical Fiber Patch Panel

Fiber optic patch panel is also called fiber distribution panel. Its main function is to terminate the fiber optic cable and provide connection access to the cable’s individual fibers. Fiber patch panels are termination units, which are designed to provide a secure, organized chamber for housing connectors and splice units. Fiber patch panels are available in rack mounted or wall mounted. Both types can house, organize, manage and protect fiber optic cable, splices and connectors. Rack mount panels is usually 19" or 23" universal width. The height of patch panel can be 1U, 2U, 3U, 4U, 6U, etc. The opening of the optical fiber patch panels can be slidable or fixed or revolving. Wall mount patch panel is more customized, it can be any structure and dimension. And the patch panels can be used for indoor or outdoor application.

READ MORE
China Manufacturer Receiver Fiber Optic Sfp Bidi Module Wavelength 1550nm 1310nm 1490nm

China Manufacturer Receiver Fiber Optic Sfp Bidi Module Wavelength 1550nm 1310nm 1490nm

BIDI-SFP optical module: BiDi (Bidirectional): single fiber bidirectional. It uses WDM (ie, wavelength division multiplexing) technology to transmit and receive different center wavelengths in two directions, thereby realizing a bidirectional transmission of optical signals in one fiber. A general optical module has two ports, a TX transmitting port and an RX receiving port, and the BIDI optical module has only one port, which is filtered by a filter in the optical module, and simultaneously performs transmission of a 1310 nm optical signal and reception of a 1550 nm optical signal, or in contrast. Therefore, BIDI modules must be used in pairs. It is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of switches and routers, can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.

READ MORE
Optical Fiber Connector

Optical Fiber Connector

Optical Fiber Connector is a reusable passive device used to connect two fibers or cables to form a continuous optical path. It has been widely used in optical fiber transmission lines and fiber distribution frames. And optical fiber test instruments and meters are the most used optical passive components. According to different classification methods, optical fiber connectors can be divided into different types. According to different transmission media, they can be divided into single-mode fiber connectors and multi-mode fiber connectors. According to different structures, they can be divided into FC, SC, ST, and D4. , DIN, Biconic, MU, LC, MT and other types; according to the pin end face of the connector can be divided into FC, PC (UPC) and APC; according to the number of fiber cores, there are single core, multi-core.

READ MORE
EPON 1080 Optical modem

EPON 1080 Optical modem

EPON-1080 Optical modem, as an optical network terminal product built by FTTH network, the product complies with IEE802.3ah and has high-quality EPON access capability. The EPON ONU optical network terminal has the characteristics of high reliability, good service quality assurance, manageability, scalability, and flexible networking, which can meet the requirements of high-speed broadband access. EPON (Ethernet Passive Optical Network), as its name suggests, is an Ethernet-based PON technology. It uses a point-to-multipoint architecture, passive optical fiber transmission, and provides multiple services over Ethernet. EPON technology is standardized by the IEEE802.3 EFM working group.

READ MORE