"GY" refers to Outdoor cable for communication, "F" refers to non-metallic reinforcing member, "T" refers to filled structure, and "Y" refers to polyethylene, "53" means Wrinkled steel strip and Polyethylene sheath. The GYFTY53 cable is constructed by inserting a 250μm fiber into a loose tube made of a high-modulus material filled with a water-repellent compound. The center of the core is a non-metallic reinforcing core (FRP). For some cores, a non-metallic reinforcing core needs to be extruded with a layer of polyethylene (PE).
GPON-4080 Optical modem has the reliability, good quality of service guarantee, manageability, scalability and flexible networking features to meet the requirements of high-speed broadband access. It also has ITUG.984 compliant GPON standards, IGMP functionality, multiple management methods, and compatibility with major OLT vendors. The GPON-4080 Optical modem can also be said to be a modem that translates a computer's digital signals into analog signals that can be transmitted along a regular telephone line, which in turn can be received by another modem on the other end of the line. A computer-readable language. This simple process completes the communication between the two computers.
Cat5 is a twisted pair cable used in computer networks. It is also a multimedia cable used in information and voice services such as data and voice. It is widely used in Ethernet and broadband access projects. Its quality is directly and inferior. It is related to the transmission quality of information communication. However, due to the development of optical fiber and communication technology, the impact of twisted pair on communication quality is also gradually reduced.The cat5 network cable will be marked with the word "CAT5" and the transmission bandwidth is 100MHz. It is used for voice transmission and data transmission with a maximum transmission rate of 100Mbps.
C450-fiber optic cabinet is a high-capacity and high-density fiber distribution frame. It adopts high-quality cold-rolled steel frame/electrolytic plate and electrostatic spraying on the whole surface. It is widely used in small and medium-sized integrated wiring projects, equipment room, intelligent community, telecommunications, school. Such projects enable the connection, distribution and scheduling of fiber-optic lines, and the detachable design makes the products more flexible and simple in application.
GY: Outdoor (field) optical cable for communication T: Filled structure S: Steel strip--polyethylene bonding sheath GYTS cable is a communication cable with a similar optical transmission speed. The 250 μm fiber is located in a loose tube made of high modulus plastic. The tube is filled with a waterproof filling compound. The center of the core is a metal reinforcement.
Breakout fiber patch cord is used to split 12-core MTP connectors terminated on trunk cable into simplex or duplex connectors. MPO/MTP connector is connected with trunk cable, while simplex or duplex connector on the other side can provide a different fan-out length which is convenient for device connection. Can also say this breakout patch cord is a fiber optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch, or other telecommunication equipment. Having a thick layer of protection, it is used to connect the optical transmitter, receiver, and the terminal box. This is known as "interconnect-style cabling".READ MORE
The Insert Type PLC Splitters is branching devices that is used to distribute optical signals to multiple locations for processing. In optical networks, it is often necessary to split an optical signal into many identical signals, or to combine many signals into a single signal. PLC Splitter (Planar lightwave circuit splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. They are designed for FTTx Passive Optical Networks, CWDM, DWDM and optical cable TV System. PLC Splitter is responsible to distribute optical signals from Central Office (CO) to multiple premise locations.We provides whole series of 1*N and 2*N splitter products that are tailored for specific applications. All prodcts meet GR-1209-CORE-2001 and GR-1221-CORE-1999 requirements.
DWDM (DWDM: Dense Wavelength Division Multiplexing) is a combination of a set of optical wavelengths that can be transmitted by one fiber. DWDM SFP is a wavelength division multiplexing technology that can couple different wavelengths of light into a single-core fiber for transmission. The channel spacing of the DWDM SFP is 0.4 nm, 0.8 nm, 1.6 nm, etc., and the spacing is small, requiring additional wavelength control devices. A key advantage of the DWDM SFP is that its protocol and transmission speed are irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols, and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit different types of data traffic at different speeds on a single laser channel. From a QoS (Quality Service) perspective, DWDM-based networks respond quickly to customer bandwidth requirements and protocol changes in a cost-effective manner.