Call us at +86 13377766112

Products: UTF Cat6 network cable manufactory

Lszh jacket drop cable UTF Cat6 network cable manufactory from China

Lszh jacket drop cable UTF Cat6 network cable manufactory from China

Fluke passed and Factory lowest price UTP CAT6 Ethernet cable/Network cable 4Pr 24 AWG BC/CCA/CCS/CCAG 305m/roll wholesale CCOFC factory is a professional manufacturer in producing Cat6 UTP/FTP/SFTP/STP/SFFTP/FFTP network cable, Power cable, Coaxial cable, Telephone cable etc. The cat6 network cable are applied to the wiring between the user communication terminal of the residential integrated wiring system and the distribution frame and the distribution frame between the communication terminal of the work area and the junction between the distribution wiring system, and are suitable for high-speed local area network, which is suitable for 240MHz channel bandwidth communication. The cross-shaped conductor divider design enhances near-end crosstalk and impedance performance, increasing bandwidth and signal-to-noise margin.

READ MORE
Fiber Optic 40G QSFP 1310nm 10km SMF LC DOM Transceiver Module

Fiber Optic 40G QSFP 1310nm 10km SMF LC DOM Transceiver Module

The 40G optical module refers to an optical module with a transmission rate of 40 Gbps. CFP and QSFP are the main package types, and the 40G QSFP optical module is one of the most widely used. The 40G QSFP+ optical module is typically used with LC single-mode fiber patch cords for transmission distances up to 10km, and it has four data channels that simultaneously transmit data. It works by the laser driver controlling the wavelength of arrival, and the optical signals are then multiplexed and combined for transmission. When the receiver arrives at the receiving end, the transmitted signals are decomposed into four channels with a transmission rate of 10 Gbps, and then the PIN detector or transimpedance amplifier recovers the data stream and then transmits the optical signal.

READ MORE
EPON 1080 Optical modem

EPON 1080 Optical modem

EPON-1080 Optical modem, as an optical network terminal product built by FTTH network, the product complies with IEE802.3ah and has high-quality EPON access capability. The EPON ONU optical network terminal has the characteristics of high reliability, good service quality assurance, manageability, scalability, and flexible networking, which can meet the requirements of high-speed broadband access. EPON (Ethernet Passive Optical Network), as its name suggests, is an Ethernet-based PON technology. It uses a point-to-multipoint architecture, passive optical fiber transmission, and provides multiple services over Ethernet. EPON technology is standardized by the IEEE802.3 EFM working group.

READ MORE
China factory outdoor battery cabinet OC576 2D Cross Connecting Cabinet

China factory outdoor battery cabinet OC576 2D Cross Connecting Cabinet

OC576-Cross Connecting Cabinet is used for outdoor cable access network ,backbone cable and indoor cable arrangement,it with high-capacity,high -density fiber distribution tray,suitable for the composition,splice and distribution of fibers in optical access network to achieve the fiber optic lines connection,distribution and scheduling. The ODF is used for the termination and distribution of the central trunk optical cable in the optical fiber communication system, and the connection, distribution and scheduling of the optical fiber line can be conveniently realized. Suitable for small to medium-sized wiring systems from fiber to cell, fiber to building, remote module office and wireless base station.

READ MORE
Optical Fiber Distribution Box

Optical Fiber Distribution Box

The fiber distribution box is suitable for the wiring connection between the optical cable and the optical communication equipment. The optical signal is extracted by the optical jumper through the adapter in the wiring box to realize the optical wiring function. It is suitable for the protective connection of fiber optic cable and wiring pigtail. It is also suitable for fiber termination point in fiber access network. This product is applied to the terminal access link in the FTTH access system, outdoor wall-mounted or hoop-mounted. The uplink is connected to the distribution cable, and the downstream cable is connected to the home, and the introduction and fixation of the optical cable, the welding of the optical fiber, and the installation and management of the optical splitter are completed, thereby realizing the splitting of the optical line.

READ MORE
EPON 4080 Optical modem

EPON 4080 Optical modem

The EPON-4080 Optical modem is an EPON terminal that can be used in FTTH scenarios. It is small in size and light in weight. It is easy to be used in the construction of the network box and the upgrade of the old network. It has a 10/100/1000Mbps interface, providing users with high-speed data services and high-quality video services, and remote service delivery and failure through OMCI. Diagnostics and performance statistics to effectively reduce operating and maintenance costs. As an optical network terminal product built by FTTH network, the product conforms to IEEE802.3ah, 24 GHz WiFi dual-band wireless connection rate up to 300 Mbps, and has high-quality EPON access capability. EPON optical network terminals have the characteristics of high reliability, good service quality, strong management capability, strong scalability, flexible networking, etc., which can meet the needs of high-speed broadband access.

READ MORE
Central Tubular Light Armored Fiber Optic Ribbon Cable GYDXTW

Central Tubular Light Armored Fiber Optic Ribbon Cable GYDXTW

The ribbon 12 fibers, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (PE) sheath.

READ MORE
Horizontal Type Splice Closure

Horizontal Type Splice Closure

The Horizontal Type Splice Closure is a mechanical pressure seal joint system, which is a joint protection device that provides optical, sealing and mechanical strength continuity between adjacent cables. It is mainly used for straight-through and branch connection of overhead, pipeline, direct burial and other laying methods applicable to various structural optical cables. The box body is made of reinforced plastic, high strength and corrosion resistance. The splice closure is suitable for connection in the terminal room of the structural fiber optic cable. The structure is mature, the seal is reliable, and the construction is convenient. Widely used in communications, network systems, CATV cable TV, fiber optic cable network systems, and more.

READ MORE