Fluke passed and Factory lowest price UTP CAT6 Ethernet cable/Network cable 4Pr 24 AWG BC/CCA/CCS/CCAG 305m/roll wholesale CCOFC factory is a professional manufacturer in producing Cat6 UTP/FTP/SFTP/STP/SFFTP/FFTP network cable, Power cable, Coaxial cable, Telephone cable etc. The cat6 network cable are applied to the wiring between the user communication terminal of the residential integrated wiring system and the distribution frame and the distribution frame between the communication terminal of the work area and the junction between the distribution wiring system, and are suitable for high-speed local area network, which is suitable for 240MHz channel bandwidth communication. The cross-shaped conductor divider design enhances near-end crosstalk and impedance performance, increasing bandwidth and signal-to-noise margin.
Fiber optic adapters, also known as fiber optic couplers, are a special type of passive component designed to fit or connect the ends of a fiber optic cable with high precision. They are sometimes named as matching sleeves and hybrid adapters. The mating sleeve means that the fiber optic adapter is used to connect the same type of fiber optic connector, and the hybrid adapter is the type of fiber optic adapter used to connect different types of fiber optic connectors. The fiber adapter is paired with two ends of different fiber connectors to realize conversion between different connectors FC, SC, ST, LC, MTRJ, MPO, E2000, and the like. They are widely used in optical distribution frames (ODF), fiber optic communication equipment and equipment, with excellent performance and good stability.
GPON-1080 optical modem constructed as a FTTH network conforms to the ITU-T G.984 standard, GPON optical network terminals are characterized by reliability, good service quality assurance, manageability, scalability and flexible networking. Can meet the access requirement of high-speed broadband.
GYDTA uses steel as the central strength member ensures good tensile resistance,and improves the bending performance. It has excellent moisture resistance ability:the loose tube is filled with grease to protect the fiber, APL tape prevent the water ingress, then the cable is completed with PE out sheath. It's suitable for aerial and duct application. Because of the good moisture resistance, it can also be used in cable trench. It has the loose tube structure with ribbon cable, which is surrounded by the APL tape. GYDTA is a good option for interoffice communication,outdoor access network.
GY: Outdoor optical cable for communication F: Non-metallic reinforcing member T: Filled structure A: Aluminum-polyethylene bonding layer The GYFTA fiber is single/multi mode fiber, stranded loose tube cable with aluminum and steel tape. It can be used for duct and direct buried application. Particularly suitable for occasions where good mechanical properties and rodent resistance are expected.
Planar lightwave circuit PLC splitter is a type of optical power management device that is fabricated using silica optical waveguide technology.It features small size,high reliability,wide operating wavelength range and good channel-to-channel uniformity,and is widely used in PON networks to realize optical signal power splitting. Bare PLC splitter is putting PLC splitter chip and input, output optical fiber array in a square metal tube, out with the diameter of 0.9mm or 250um bare fiber ,fiber can be welded, can also be processing various types of optical fiber connector. We provides whole series of 1*N and 2*N splitter products that are tailored for specific applications.All products meet "YD/T1117-2001 All optical fiber branching device technical conditions","YD-T 2000-209 PLC Integrated optical devices PLC optical power splitter"etc, and are certified by TLC for network deployment.
EOC-4051 Optical modem fully complies with the IEEE P1901 standard and China Telecom EOC equipment technical requirements. It has the characteristics of carrier-class operation, manageability and easy maintenance. It is a bridge-type home-side device and realizes ultra-wideband for home/SOHO users through EOC technology. Access. It has one PON uplink interface connected to the central office equipment through optical fibers. The structure is small, supporting the placement of the desktop, wall hanging or placed in the corridor information box. As an Ethernet coaxial terminal product, Ethernet access is performed using a coaxial cable. The EoC terminal device has a built-in Wifi wireless function and includes four 100M Ethernet ports for works with EOC master in Ethernet over coax network.Ability to provide high quality Internet access, voice, IPTV, VoIP and video surveillance.
C220 fiber optic cabinet is a high capacity and high density fiber distribution frame, suitable for the composition and distribution of fibers in optical access network to achieve the fiber optic lines connection, distribution and scheduling. Advanced fiber optic cabling management design to ensure easy installation, construction and maintenance of fiber optic cables and cores. It has the characteristics of beautiful appearance, strong dustproof and anti-interference, and good anti-corrosion performance.