Call us at +86 13377766112

Products: Very Low Price Modem

GPON 1280 Optical modem

GPON 1280 Optical modem

GPON-1280 Optical modem, WIFI dual-band wireless connection speed up to 300 Mbps at 24 GHz, and dual-band wireless speed up to 1200 Mbps, support 2/3 layer network protocol and high-quality voice transmission. GPON optical network terminals have reliability, good service quality assurance, manageability scalability and flexible networking features.The GPON standard is the ITU-TG.984 series of standards. The development of the GPON standard considers the support for traditional TDM services, and continues to adopt the 125ms fixed frame structure to maintain the 8K timing continuation. In order to support multiple protocols such as ATM, GPON defines a new package structure GEM:GPONEncapsulaTIonMethod. The data of ATM and other protocols can be mixed and encapsulated into frames.GPON is positioned in the telecom industry for multi-service, QoS-guaranteed full-service access needs, and strives to find an optimal, full-service, and most efficient solution, and proposes to "completely and thoroughly open all protocols." reconsider".

READ MORE
GYXTW Center beam tube type light armored cable

GYXTW Center beam tube type light armored cable

GY-Outdoor optical cable for communication,X-Central tubular structure,T-Filled,W-Steel polyethylene bonded sheath with steel wire. GYXTW fiber optic cable, 250um, in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound, mainly for the longitudinal water blocking of the fiber and the compactness of the fiber. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape.

READ MORE
GYTC8A fiber optic cable protection sleeve

GYTC8A fiber optic cable protection sleeve

GY: Outdoor communication cable T: Filled structure C: Self-supporting structure 8: 8-shaped A: Aluminum-polyethylene bonded sheath The structure of the GYTC8A cable is to insert a single-mode or multi-mode fiber into a loose tube made of a high-modulus material filled with a waterproof compound. The center of the core is a metal reinforcement.

READ MORE
GYTS fiber optic cable Layer twisted light armored cable

GYTS fiber optic cable Layer twisted light armored cable

GY: Outdoor (field) optical cable for communication T: Filled structure S: Steel strip--polyethylene bonding sheath GYTS cable is a communication cable with a similar optical transmission speed. The 250 μm fiber is located in a loose tube made of high modulus plastic. The tube is filled with a waterproof filling compound. The center of the core is a metal reinforcement.

READ MORE
EOC 4051 Optical modem

EOC 4051 Optical modem

EOC-4051 Optical modem fully complies with the IEEE P1901 standard and China Telecom EOC equipment technical requirements. It has the characteristics of carrier-class operation, manageability and easy maintenance. It is a bridge-type home-side device and realizes ultra-wideband for home/SOHO users through EOC technology. Access. It has one PON uplink interface connected to the central office equipment through optical fibers. The structure is small, supporting the placement of the desktop, wall hanging or placed in the corridor information box. As an Ethernet coaxial terminal product, Ethernet access is performed using a coaxial cable. The EoC terminal device has a built-in Wifi wireless function and includes four 100M Ethernet ports for works with EOC master in Ethernet over coax network.Ability to provide high quality Internet access, voice, IPTV, VoIP and video surveillance.

READ MORE
Optical Fiber Distribution Box

Optical Fiber Distribution Box

The fiber distribution box is suitable for the wiring connection between the optical cable and the optical communication equipment. The optical signal is extracted by the optical jumper through the adapter in the wiring box to realize the optical wiring function. It is suitable for the protective connection of fiber optic cable and wiring pigtail. It is also suitable for fiber termination point in fiber access network. This product is applied to the terminal access link in the FTTH access system, outdoor wall-mounted or hoop-mounted. The uplink is connected to the distribution cable, and the downstream cable is connected to the home, and the introduction and fixation of the optical cable, the welding of the optical fiber, and the installation and management of the optical splitter are completed, thereby realizing the splitting of the optical line.

READ MORE
JET Micro center bundle tube type non metal optical cable

JET Micro center bundle tube type non metal optical cable

J: Optical fiber tight covering structure, E: Elliptical shape, T: Filled structure JET outdoor fiber optic cable, 250μm, either of single-mode or multi-mode type, are positioned in a loose tube made of a high modulus plastic. The center of the cable core is a non-metallic reinforcing core (FRP) and reinforced core with water blocking yarn A layer of aramid yarn or high strength glass is applied around the cable core as additional strength member. The tubes are filled with a water-resistant filling compound. Then, the cable is completed with a black or color sheath.The original overhead line is used for long-distance communication and inter-office communication lines. Different types of aerial cables are suitable for hanging wire and self-supporting.

READ MORE
100G QSFP Dual LC LWDM 10KM Optical Communication QSFP Module

100G QSFP Dual LC LWDM 10KM Optical Communication QSFP Module

The 100G QSFp Optical Module integrates the receiver and transmitter paths on one module. At the transmitting end, the four channels of serial data are recovered, retimed, and passed to the four laser drivers. The laser driver controls a 4-distributed feedback laser (DFB) with center wavelengths of 1296 nm, 1300 nm, 1305 nm, and 1309 nm. The optical signal is multiplexed to a single mode fiber through an industry standard LC connector. On the receiving side, the four optical data stream channels are optically demultiplexed by an integrated optical demultiplexer. Each data stream is recovered by the PIN photodetector and transimpedance amplifier and retimed. The module features a hot-swappable electrical interface, low power consumption and MDIO management interface. Designed according to the QSFP Multi-Source Agreement (MSA), the product features a form factor, optical/electrical connection and digital diagnostic interface, and is compliant with the IEEE 802.3bm standard.

READ MORE