OC576-Cross Connecting Cabinet is used for outdoor cable access network ,backbone cable and indoor cable arrangement,it with high-capacity,high -density fiber distribution tray,suitable for the composition,splice and distribution of fibers in optical access network to achieve the fiber optic lines connection,distribution and scheduling. The ODF is used for the termination and distribution of the central trunk optical cable in the optical fiber communication system, and the connection, distribution and scheduling of the optical fiber line can be conveniently realized. Suitable for small to medium-sized wiring systems from fiber to cell, fiber to building, remote module office and wireless base station.
J: Optical fiber tight covering structure, E: Elliptical shape, T: Filled structure JET outdoor fiber optic cable, 250μm, either of single-mode or multi-mode type, are positioned in a loose tube made of a high modulus plastic. The center of the cable core is a non-metallic reinforcing core (FRP) and reinforced core with water blocking yarn A layer of aramid yarn or high strength glass is applied around the cable core as additional strength member. The tubes are filled with a water-resistant filling compound. Then, the cable is completed with a black or color sheath.The original overhead line is used for long-distance communication and inter-office communication lines. Different types of aerial cables are suitable for hanging wire and self-supporting.
The 40G optical module refers to an optical module with a transmission rate of 40 Gbps. CFP and QSFP are the main package types, and the 40G QSFP optical module is one of the most widely used. The 40G QSFP+ optical module is typically used with LC single-mode fiber patch cords for transmission distances up to 10km, and it has four data channels that simultaneously transmit data. It works by the laser driver controlling the wavelength of arrival, and the optical signals are then multiplexed and combined for transmission. When the receiver arrives at the receiving end, the transmitted signals are decomposed into four channels with a transmission rate of 10 Gbps, and then the PIN detector or transimpedance amplifier recovers the data stream and then transmits the optical signal.
OC280-Cross Connecting Cabinet is use for outdoor cable access network,backbone cable and indoor cable arangement,it with high-capacity,high-density fiber distribution tray,suitable for the composition,splice and distribution of fibers in optical access network to achieve the fiber optic lines connection,distributing and scheduling.It features a fully enclosed cabinet that is aesthetically pleasing; has many features such as secure fiber storage and preventability. Moreover, the cabinet logo is clear, and the connection and distribution of each fiber have obvious signals, which can meet the needs of the ribbon fiber cable and the non-ribbon fiber cable at that time.
The Horizontal Type Splice Closure is a mechanical pressure seal joint system, which is a joint protection device that provides optical, sealing and mechanical strength continuity between adjacent cables. It is mainly used for straight-through and branch connection of overhead, pipeline, direct burial and other laying methods applicable to various structural optical cables. The box body is made of reinforced plastic, high strength and corrosion resistance. The splice closure is suitable for connection in the terminal room of the structural fiber optic cable. The structure is mature, the seal is reliable, and the construction is convenient. Widely used in communications, network systems, CATV cable TV, fiber optic cable network systems, and more.
DWDM (DWDM: Dense Wavelength Division Multiplexing) is a combination of a set of optical wavelengths that can be transmitted by one fiber. DWDM SFP is a wavelength division multiplexing technology that can couple different wavelengths of light into a single-core fiber for transmission. The channel spacing of the DWDM SFP is 0.4 nm, 0.8 nm, 1.6 nm, etc., and the spacing is small, requiring additional wavelength control devices. A key advantage of the DWDM SFP is that its protocol and transmission speed are irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols, and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit different types of data traffic at different speeds on a single laser channel. From a QoS (Quality Service) perspective, DWDM-based networks respond quickly to customer bandwidth requirements and protocol changes in a cost-effective manner.
Pre-terminated high-precision MPO/MTP patch cord can achieve multi-fiber connectivity. It also can be used for internal frame cabling. MPO/MTP multi-fiber cabling system is ideally suited for a high density environment that demands space saving and innovative cable management solutions. The spring - loaded push/pull locking mechanism of the MPO is easy to handle while guaranteeing the secure mating of the connectors. High- precision guiding pins ensure the exact adjustment of the ferrule. t offered in fiber types in standard 8, 12, 24 or 48 cores versions using a compact , and with multimode and singlemode fibres secure transition between MPO/MTP and LC or SC connections.READ MORE
Fiber patch cords are fiber-optic cables with connectors on both ends that can be connected directly to a computer or other network device. Fiber patch cords are commonly used to connect light emitting devices, light receiving devices, and fiber optic terminal boxes. Single-mode fiber patch cord cores are particularly small in diameter, typically only 9 μm, and have only one light propagation path. It is for this reason that light can only be transmitted along the axis of the fiber, thereby completely avoiding the waste of dispersion and light energy.