Planar lightwave circuit PLC splitter is a type of optical power management device that is fabricated using silica optical waveguide technology.It features small size,high reliability,wide operating wavelength range and good channel-to-channel uniformity,and is widely used in PON networks to realize optical signal power splitting. Bare PLC splitter is putting PLC splitter chip and input, output optical fiber array in a square metal tube, out with the diameter of 0.9mm or 250um bare fiber ,fiber can be welded, can also be processing various types of optical fiber connector. We provides whole series of 1*N and 2*N splitter products that are tailored for specific applications.All products meet "YD/T1117-2001 All optical fiber branching device technical conditions","YD-T 2000-209 PLC Integrated optical devices PLC optical power splitter"etc, and are certified by TLC for network deployment.
Breakout Fiber Optic Cable is also called Large-core hybrid branch cable. The cable uses an 8-core sub-unit(900μm tight fitting fiber, an aramid reinforcing element) and a non-metallic center reinforcing core. The cable sub-unit layer is twisted on the center reinforcing core form a cable core, and the outer most layer is extruded with a polyvinyl chloride(PVC) sheathed LSZH or other agreed material jackets are also available upon request. For termination and maintenance, the drop cable facilitates independent routing or branching of the individual fibers.
Outdoor armoured FTTA water-proof patch cord are used to jump from the device to the fiber optic cabling link. There is a thick protective layer, generally used in the optical terminal and the box between the connection, used in fiber communication systems , fiber access network, optical fiber data transmission and LAN and other areas. Armored outdoor fiber patch cord is used for the antenna, and base station far transmission. Fiber optic patch cable is kind of indoor and outdoor patch cord, built on LSZH cable with 7.0mm diameter, with water blocking aramid yarns and UV resistant black out jacket. Produces FULL ARMOURED patch cord for harsh environment, especially for rodent resistance and bird resistance.
Fiber optic patch panel is modulized design with Swing tray inside.Each Swing tray can splice 24fibers. It could be pre-installed with various kinds of fiber optic adapters and pigtails. It is ideal for indoor fiber optic cables connection storage, distribution and management.
GY: Outdoor communication cable T: Filled structure C: Self-supporting structure 8: 8-shaped A: Aluminum-polyethylene bonded sheath The structure of the GYTC8A cable is to insert a single-mode or multi-mode fiber into a loose tube made of a high-modulus material filled with a waterproof compound. The center of the core is a metal reinforcement.
EOC-4051 Optical modem fully complies with the IEEE P1901 standard and China Telecom EOC equipment technical requirements. It has the characteristics of carrier-class operation, manageability and easy maintenance. It is a bridge-type home-side device and realizes ultra-wideband for home/SOHO users through EOC technology. Access. It has one PON uplink interface connected to the central office equipment through optical fibers. The structure is small, supporting the placement of the desktop, wall hanging or placed in the corridor information box. As an Ethernet coaxial terminal product, Ethernet access is performed using a coaxial cable. The EoC terminal device has a built-in Wifi wireless function and includes four 100M Ethernet ports for works with EOC master in Ethernet over coax network.Ability to provide high quality Internet access, voice, IPTV, VoIP and video surveillance.
Optical Fiber Connector is a reusable passive device used to connect two fibers or cables to form a continuous optical path. It has been widely used in optical fiber transmission lines and fiber distribution frames. And optical fiber test instruments and meters are the most used optical passive components. According to different classification methods, optical fiber connectors can be divided into different types. According to different transmission media, they can be divided into single-mode fiber connectors and multi-mode fiber connectors. According to different structures, they can be divided into FC, SC, ST, and D4. , DIN, Biconic, MU, LC, MT and other types; according to the pin end face of the connector can be divided into FC, PC (UPC) and APC; according to the number of fiber cores, there are single core, multi-core.
Description of this QSFP AOC 40G Active Optical Cable fiber cable optical transceiver module manufacturer 40G QSFP+ AOC Optical module 40G QSFP+ AOC Optical module, QSFP + Active Optical Cables (AOCs