If you are interested in fiber optic cable manufacturer, Guangdong changcheng communication Technology Co.,Ltd If you are interested in 1related results, so you can compare and shop! Try finding the one that is right for you by choosing the price range, brand, or specifications that meet your needs.
GPON-1080 optical modem constructed as a FTTH network conforms to the ITU-T G.984 standard, GPON optical network terminals are characterized by reliability, good service quality assurance, manageability, scalability and flexible networking. Can meet the access requirement of high-speed broadband.
The 40G optical module refers to an optical module with a transmission rate of 40 Gbps. CFP and QSFP are the main package types, and the 40G QSFP optical module is one of the most widely used. The 40G QSFP+ optical module is typically used with LC single-mode fiber patch cords for transmission distances up to 10km, and it has four data channels that simultaneously transmit data. It works by the laser driver controlling the wavelength of arrival, and the optical signals are then multiplexed and combined for transmission. When the receiver arrives at the receiving end, the transmitted signals are decomposed into four channels with a transmission rate of 10 Gbps, and then the PIN detector or transimpedance amplifier recovers the data stream and then transmits the optical signal.
EPON-1080 Optical modem, as an optical network terminal product built by FTTH network, the product complies with IEE802.3ah and has high-quality EPON access capability. The EPON ONU optical network terminal has the characteristics of high reliability, good service quality assurance, manageability, scalability, and flexible networking, which can meet the requirements of high-speed broadband access. EPON (Ethernet Passive Optical Network), as its name suggests, is an Ethernet-based PON technology. It uses a point-to-multipoint architecture, passive optical fiber transmission, and provides multiple services over Ethernet. EPON technology is standardized by the IEEE802.3 EFM working group.
The Dome Type Splice Closure is made of high quality engineering plastic. Provides different port types, accessories, and different fiber core number optical connector closures for the fiber. The main applications for vertical fiber optic connector closures are cable television, telecommunications, and fiber optic networks. They are suitable for fiber optic connector protection in both straight-through and branch applications and can be used in antenna, pipe and direct-buried fiber optic cable projects. Dome Type Splice Closure provides with 4 fiber cable in-out round ports and the cable diameter is from ψ7-ψ18. it is widely applied to the splicing and distributing variable optical cables. This product is made of ABS and with the mechanical sealing structure filled with the sealing material. The external component and fastening piece are all made of the high-quality iron. It can be opened after sealing.
DWDM (DWDM: Dense Wavelength Division Multiplexing) is a combination of a set of optical wavelengths that can be transmitted by one fiber. DWDM SFP is a wavelength division multiplexing technology that can couple different wavelengths of light into a single-core fiber for transmission. The channel spacing of the DWDM SFP is 0.4 nm, 0.8 nm, 1.6 nm, etc., and the spacing is small, requiring additional wavelength control devices. A key advantage of the DWDM SFP is that its protocol and transmission speed are irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols, and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit different types of data traffic at different speeds on a single laser channel. From a QoS (Quality Service) perspective, DWDM-based networks respond quickly to customer bandwidth requirements and protocol changes in a cost-effective manner.
GY: Outdoor (field) optical cable for communication T: Filled structure S: Steel strip--polyethylene bonding sheath GYTS cable is a communication cable with a similar optical transmission speed. The 250 μm fiber is located in a loose tube made of high modulus plastic. The tube is filled with a waterproof filling compound. The center of the core is a metal reinforcement.
Description of this QSFP AOC 40G Active Optical Cable fiber cable optical transceiver module manufacturer 40G QSFP+ AOC Optical module 40G QSFP+ AOC Optical module, QSFP + Active Optical Cables (AOCs
Simplex indoor optical cable is made by evenly applying strands of aramid yarns as the strength member over tight buffer fibers and then is completed with a flame retardant sheath(CPR-Cca).