We are a professional Fiber Cables - Monoprice product manufacturer in China.Our company has hign quality control capabilities, which ensure us to meeting your requirements for products' quality.Our fiber optic audio cable are produced by high quality, there are some details in following article.Our factory have the confidence that through our mutual trust and long-term cooperation, we can build a good solid friendship.Really good suppliers will always do better in service than others.Best wishes to you.
2fiber, Figure-8 structure,900μm or 600μm tight buffer fiber, Aramid yarn, PVC jacket.Speak in detail, the figure-8fiber optic cable uses two Φ900μm or Φ600μm flame-retardant tight-fitting optical fibers as the optical transmission medium, and is covered with a layer of aramid as the force-strengthening unit, and extruded a layer of 8-shaped polyvinyl chloride (PVC) or low-smoke. Halogen-free material (LSZH, low-smoke, halogen-free, flame retardant) sheathed.
Tight buffered fiber optic cable is produced as that fiber is sheathed by buffer material. The selection of top-quality fiber, the specific production equipment and the accurate design assure the performance of the product. To be more specific, a single-mode or multi-mode fiber with a tightly-coated secondary coating structure is called a tight buffered fiber or a tight-packed fiber, and is a double-over-plastic (PVC/PVDF) directly coated on a bare fiber (UV fiber). /LSZH/Hytrel), the outer diameter of the tight-fitting fiber is usually 0.6mm and 0.9mm. It is the basic component for manufacturing various indoor optical cables. It can also be used alone and twice coated with various materials. The tight-fitting fiber can be directly used as a pigtail for the connection of various optical active or passive components, the connection of instruments and terminal equipment, and the like.
GY: Outdoor (field) optical cable for communication T: Filled structure Y: Polyethylene 5: Wrinkled steel strip 3: Polyethylene sheath Fiber optic cable GYTY53, 2~144 fiber, central strength member (steel), jelly filled, fiber-containing loose tube and PP filler (if necessary) stranded, water blocking tape, PE inner sheath, longitudinally covered copolymer coated steel Belt, PE sheath. It has two different types: single-mode GYTY53 cable and multi-mode GYTY53 cable.
GYFTA53 cable, 250um, is positioned in a tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core.
"GY" means outdoor optical cable for communication, "F" means non-metallic reinforcing member, "T" means ointment filling structure, "Y" means polyethylene sheath. GYFTY is positioned in a loose tube made of a high modulus plastic. At the center of the core is a fiberglass reinforced plastic (FRP), and the loose tube (and the filling rope) is twisted around the central reinforcing core into a compact and round core with a gap in the core filled with a water-blocking filler. The outer core of the cable is extruded with a polyethylene inner sheath to form a cable.
ADSS cable, the all-media self-supporting optical cable is a non-metallic optical cable which is composed entirely of dielectric materials and contains the necessary support system and can be directly suspended on the power pole. Fibers, 250μm, are positioned in a loose tube made of a high modulus plastics. The tubes are filled with a water-resistant filling compound.
"GY" means Outdoor optical cable for communication,"T" means Filled structure,"A" means Aluminum belt--polyethylene bonding layer. The GYTA cable is a loose tube made of a high-modulus material, which is filled with a 250 μm fiber. And the loose tube is filled with a waterproof compound. The center of the core is a metal reinforced core. For some cores, a layer of polyethylene (PE) is required to be extruded outside the metal reinforced core.