GY: Outdoor communication cable T: Filled structure C: Self-supporting structure 8: 8-shaped A: Aluminum-polyethylene bonded sheath The structure of the GYTC8A cable is to insert a single-mode or multi-mode fiber into a loose tube made of a high-modulus material filled with a waterproof compound. The center of the core is a metal reinforcement.
The SFP+ DWDM optical module adopts an LC optical port and is compatible with IEEE802.3ae and SFF-8472. It has low power consumption, small size, and high speed. The SFP+DWDM optical module is capable of combining a set of optical wavelengths for transmission using one fiber. SFP+DWDM is a wavelength division multiplexing technology that can couple different wavelengths of light into a single-core fiber for transmission. SFP+DWDM requires less spacing and requires additional wavelength control devices. The advantage of SFP+DWDM is that its protocol and transmission speed are irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols, and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit different types of data traffic at different speeds on a single laser channel. Mainly used in data center interconnection, SONET/SDH, metropolitan area network, 4G LET wireless network, transmission network, high-speed point-to-point link, Fibre Channel and other environments.
The Dome Type Splice Closure is made of high quality engineering plastic. Provides different port types, accessories, and different fiber core number optical connector closures for the fiber. The main applications for vertical fiber optic connector closures are cable television, telecommunications, and fiber optic networks. They are suitable for fiber optic connector protection in both straight-through and branch applications and can be used in antenna, pipe and direct-buried fiber optic cable projects. Dome Type Splice Closure provides with 4 fiber cable in-out round ports and the cable diameter is from ψ7-ψ18. it is widely applied to the splicing and distributing variable optical cables. This product is made of ABS and with the mechanical sealing structure filled with the sealing material. The external component and fastening piece are all made of the high-quality iron. It can be opened after sealing.
Micro Type Splitter is highly protective for fiber optic lines and is the result of miniaturization of cassette optical splitters. It is mainly used in various types of wiring boxes or cabinets, and is an intermediate choice for compact size and reliable fiber protection. Micro Type Splitter, planar waveguide light optical distributor (PLC Splitter), is a kind of planar waveguide integrated optical device, it can be 1260nm ~ 1650nm such a wide range of wavelengths of light power reservation in realization, the distribution of wavelength range covers EPON technology used 1310nm, 1490nm and 1550nm three wavelengths. Especially suitable for EPON Ethernet passive optical network access technology FTTP fiber network system, broadband passive optical optical distributor (POS) use. Including 1x2, 1x4, 1x8, 1x16, 1x32, 1x64, and 2x2, 2X4, 2X8, 2X16, 2X32, 2X64 type.
The Insert Type PLC Splitters is branching devices that is used to distribute optical signals to multiple locations for processing. In optical networks, it is often necessary to split an optical signal into many identical signals, or to combine many signals into a single signal. PLC Splitter (Planar lightwave circuit splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. They are designed for FTTx Passive Optical Networks, CWDM, DWDM and optical cable TV System. PLC Splitter is responsible to distribute optical signals from Central Office (CO) to multiple premise locations.We provides whole series of 1*N and 2*N splitter products that are tailored for specific applications. All prodcts meet GR-1209-CORE-2001 and GR-1221-CORE-1999 requirements.
Outdoor armoured FTTA water-proof patch cord are used to jump from the device to the fiber optic cabling link. There is a thick protective layer, generally used in the optical terminal and the box between the connection, used in fiber communication systems , fiber access network, optical fiber data transmission and LAN and other areas. Armored outdoor fiber patch cord is used for the antenna, and base station far transmission. Fiber optic patch cable is kind of indoor and outdoor patch cord, built on LSZH cable with 7.0mm diameter, with water blocking aramid yarns and UV resistant black out jacket. Produces FULL ARMOURED patch cord for harsh environment, especially for rodent resistance and bird resistance.
The ribbon 12 fibers, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (PE) sheath.
Small size, reasonable design for cable protection ABS plastic material, white and black color available 2 cable port (1 in 1 out) diameter 8.0mm Inside 6 fiber slot for max. 12 fibers splicing. With fixing cable strengthen core parts Wall mounted, aerial hang application Dust-proof and waterproof, IP65.