Call us at +86 13377766112

Products: fiber optic terminal cabinet

C700 Fiber Optic Cabinet

C700 Fiber Optic Cabinet

The indoor C700-fiber optic cabinet is made of cold rolled steel or alloy for storage of fiber optics, jumpers and related control equipment. And its also the same as the network cabinet, it consists of a frame and a cover (door). It generally has a rectangular parallelepiped shape and is placed on the floor. It can provide suitable environmental and safety protection for fiber optic cables, shielding interference, ordering and neatly arranging optical fibers for future maintenance. This is the first level assembly after the system level. A cabinet that does not have a closed structure is called a rack.

READ MORE
User defined length Network Cable Cat 6e

User defined length Network Cable Cat 6e

The cat 6e network cable is an upgraded version of the Category 6 network cable, so it is also called “Enhanced Category 6 Network Cable” and complies with the standards of ISO/IEC 11801:2002 and EIA/TIA 568-B.2-1. The performance of the other aspects is better than the six types of network cables. Compared with the six types of network cables, the outer diameter of the cat 6e network cable is larger. The weight is heavier and the minimum bending radius is larger, and the maximum transmission distance of the super six types of network cables is 100m, and it can be compatible with the six types and super five types of network cables.The cat 6e network cables are shielded (UTP) and unshielded (FTP), and there are significant differences in structure between the two.

READ MORE
Fiber Optic 40G QSFP 1310nm 10km SMF LC DOM Transceiver Module

Fiber Optic 40G QSFP 1310nm 10km SMF LC DOM Transceiver Module

The 40G optical module refers to an optical module with a transmission rate of 40 Gbps. CFP and QSFP are the main package types, and the 40G QSFP optical module is one of the most widely used. The 40G QSFP+ optical module is typically used with LC single-mode fiber patch cords for transmission distances up to 10km, and it has four data channels that simultaneously transmit data. It works by the laser driver controlling the wavelength of arrival, and the optical signals are then multiplexed and combined for transmission. When the receiver arrives at the receiving end, the transmitted signals are decomposed into four channels with a transmission rate of 10 Gbps, and then the PIN detector or transimpedance amplifier recovers the data stream and then transmits the optical signal.

READ MORE
Sophisticated quality outdoor cabinet 17070 Outdoor Telecom Cabinet

Sophisticated quality outdoor cabinet 17070 Outdoor Telecom Cabinet

17070-Outdoor Telecom Cabinet is mainly composed of external cabinets,internal sheet metal parts,industrial air conditioners,power distribution units,switching power supplies and backup batteries.The whole temperature is constant ,and it ia waterproof,dustproof and anti-corrosive.It can meet the harsh outdoor environment and is widely used in communication,broadcasting,security,power and monitoring stations. The outdoor cabinet is the industry development trend of integration, miniaturization, modularization of components and energy saving and emission reduction of communication station main equipment, reducing the pressure on customer sites to obtain information, and meeting customers' needs for flexible expansion, rapid deployment and long-term evolution. And the product is designed.

READ MORE
Stranded Layer Non Armored Ribbon Fiber GYFDTA

Stranded Layer Non Armored Ribbon Fiber GYFDTA

GYFDTA uses FRP as the central strength member ensures good tensile resistance,and improves the bending performance.The middle layer of aramid yarn increases the tensile strength of the cable. It has excellent moisture resistance ability:the loose tube is filled with grease to protect the fiber, APL tape prevent the water ingress, then the cable is completed with PE out sheath. It's suitable for aerial and duct application. Because of the good moisture resistance, it can also be used in cable trench. It has the loose tube structure with ribbon cable, which is surrounded by the APL tape. GYFDTA is a good option for interoffice communication,outdoor access network

READ MORE
Optical Fiber Connector

Optical Fiber Connector

Optical Fiber Connector is a reusable passive device used to connect two fibers or cables to form a continuous optical path. It has been widely used in optical fiber transmission lines and fiber distribution frames. And optical fiber test instruments and meters are the most used optical passive components. According to different classification methods, optical fiber connectors can be divided into different types. According to different transmission media, they can be divided into single-mode fiber connectors and multi-mode fiber connectors. According to different structures, they can be divided into FC, SC, ST, and D4. , DIN, Biconic, MU, LC, MT and other types; according to the pin end face of the connector can be divided into FC, PC (UPC) and APC; according to the number of fiber cores, there are single core, multi-core.

READ MORE
Lszh jacket drop cable UTF Cat6 network cable manufactory from China

Lszh jacket drop cable UTF Cat6 network cable manufactory from China

Fluke passed and Factory lowest price UTP CAT6 Ethernet cable/Network cable 4Pr 24 AWG BC/CCA/CCS/CCAG 305m/roll wholesale CCOFC factory is a professional manufacturer in producing Cat6 UTP/FTP/SFTP/STP/SFFTP/FFTP network cable, Power cable, Coaxial cable, Telephone cable etc. The cat6 network cable are applied to the wiring between the user communication terminal of the residential integrated wiring system and the distribution frame and the distribution frame between the communication terminal of the work area and the junction between the distribution wiring system, and are suitable for high-speed local area network, which is suitable for 240MHz channel bandwidth communication. The cross-shaped conductor divider design enhances near-end crosstalk and impedance performance, increasing bandwidth and signal-to-noise margin.

READ MORE
EOC 4051 Optical modem

EOC 4051 Optical modem

EOC-4051 Optical modem fully complies with the IEEE P1901 standard and China Telecom EOC equipment technical requirements. It has the characteristics of carrier-class operation, manageability and easy maintenance. It is a bridge-type home-side device and realizes ultra-wideband for home/SOHO users through EOC technology. Access. It has one PON uplink interface connected to the central office equipment through optical fibers. The structure is small, supporting the placement of the desktop, wall hanging or placed in the corridor information box. As an Ethernet coaxial terminal product, Ethernet access is performed using a coaxial cable. The EoC terminal device has a built-in Wifi wireless function and includes four 100M Ethernet ports for works with EOC master in Ethernet over coax network.Ability to provide high quality Internet access, voice, IPTV, VoIP and video surveillance.

READ MORE