GPON-1080 optical modem constructed as a FTTH network conforms to the ITU-T G.984 standard, GPON optical network terminals are characterized by reliability, good service quality assurance, manageability, scalability and flexible networking. Can meet the access requirement of high-speed broadband.
C450-fiber optic cabinet is a high-capacity and high-density fiber distribution frame. It adopts high-quality cold-rolled steel frame/electrolytic plate and electrostatic spraying on the whole surface. It is widely used in small and medium-sized integrated wiring projects, equipment room, intelligent community, telecommunications, school. Such projects enable the connection, distribution and scheduling of fiber-optic lines, and the detachable design makes the products more flexible and simple in application.
GY: Outdoor optical cable for communication F: Non-metallic reinforcing member T: Filled structure A: Aluminum-polyethylene bonding layer The GYFTA fiber is single/multi mode fiber, stranded loose tube cable with aluminum and steel tape. It can be used for duct and direct buried application. Particularly suitable for occasions where good mechanical properties and rodent resistance are expected.
The SFP+ DWDM optical module adopts an LC optical port and is compatible with IEEE802.3ae and SFF-8472. It has low power consumption, small size, and high speed. The SFP+DWDM optical module is capable of combining a set of optical wavelengths for transmission using one fiber. SFP+DWDM is a wavelength division multiplexing technology that can couple different wavelengths of light into a single-core fiber for transmission. SFP+DWDM requires less spacing and requires additional wavelength control devices. The advantage of SFP+DWDM is that its protocol and transmission speed are irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols, and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit different types of data traffic at different speeds on a single laser channel. Mainly used in data center interconnection, SONET/SDH, metropolitan area network, 4G LET wireless network, transmission network, high-speed point-to-point link, Fibre Channel and other environments.
2fiber, Figure-8 structure,900μm or 600μm tight buffer fiber, Aramid yarn, PVC jacket.Speak in detail, the figure-8fiber optic cable uses two Φ900μm or Φ600μm flame-retardant tight-fitting optical fibers as the optical transmission medium, and is covered with a layer of aramid as the force-strengthening unit, and extruded a layer of 8-shaped polyvinyl chloride (PVC) or low-smoke. Halogen-free material (LSZH, low-smoke, halogen-free, flame retardant) sheathed.
Professional fiber manufacturer from Guangdong province, China. The structure of GYTA53 optical cable is to insert a single-mode or multi-mode optical fiber into a loose tube made of a high modulus polyester material, and the casing is filled with a waterproof compound. A fiber reinforced plastic (FRP) locates in the center of core as a non-metallic strength member.
Fluke passed and Factory lowest price UTP CAT6 Ethernet cable/Network cable 4Pr 24 AWG BC/CCA/CCS/CCAG 305m/roll wholesale CCOFC factory is a professional manufacturer in producing Cat6 UTP/FTP/SFTP/STP/SFFTP/FFTP network cable, Power cable, Coaxial cable, Telephone cable etc. The cat6 network cable are applied to the wiring between the user communication terminal of the residential integrated wiring system and the distribution frame and the distribution frame between the communication terminal of the work area and the junction between the distribution wiring system, and are suitable for high-speed local area network, which is suitable for 240MHz channel bandwidth communication. The cross-shaped conductor divider design enhances near-end crosstalk and impedance performance, increasing bandwidth and signal-to-noise margin.
Fiber optic patch panel is also called fiber distribution panel. Its main function is to terminate the fiber optic cable and provide connection access to the cable’s individual fibers. Fiber patch panels are termination units, which are designed to provide a secure, organized chamber for housing connectors and splice units. Fiber patch panels are available in rack mounted or wall mounted. Both types can house, organize, manage and protect fiber optic cable, splices and connectors. Rack mount panels is usually 19" or 23" universal width. The height of patch panel can be 1U, 2U, 3U, 4U, 6U, etc. The opening of the optical fiber patch panels can be slidable or fixed or revolving. Wall mount patch panel is more customized, it can be any structure and dimension. And the patch panels can be used for indoor or outdoor application.