GPON-4080 Optical modem has the reliability, good quality of service guarantee, manageability, scalability and flexible networking features to meet the requirements of high-speed broadband access. It also has ITUG.984 compliant GPON standards, IGMP functionality, multiple management methods, and compatibility with major OLT vendors. The GPON-4080 Optical modem can also be said to be a modem that translates a computer's digital signals into analog signals that can be transmitted along a regular telephone line, which in turn can be received by another modem on the other end of the line. A computer-readable language. This simple process completes the communication between the two computers.
BIDI-SFP optical module: BiDi (Bidirectional): single fiber bidirectional. It uses WDM (ie, wavelength division multiplexing) technology to transmit and receive different center wavelengths in two directions, thereby realizing a bidirectional transmission of optical signals in one fiber. A general optical module has two ports, a TX transmitting port and an RX receiving port, and the BIDI optical module has only one port, which is filtered by a filter in the optical module, and simultaneously performs transmission of a 1310 nm optical signal and reception of a 1550 nm optical signal, or in contrast. Therefore, BIDI modules must be used in pairs. It is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of switches and routers, can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.
The SFP+ DWDM optical module adopts an LC optical port and is compatible with IEEE802.3ae and SFF-8472. It has low power consumption, small size, and high speed. The SFP+DWDM optical module is capable of combining a set of optical wavelengths for transmission using one fiber. SFP+DWDM is a wavelength division multiplexing technology that can couple different wavelengths of light into a single-core fiber for transmission. SFP+DWDM requires less spacing and requires additional wavelength control devices. The advantage of SFP+DWDM is that its protocol and transmission speed are irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols, and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit different types of data traffic at different speeds on a single laser channel. Mainly used in data center interconnection, SONET/SDH, metropolitan area network, 4G LET wireless network, transmission network, high-speed point-to-point link, Fibre Channel and other environments.
Description of this QSFP AOC 40G Active Optical Cable fiber cable optical transceiver module manufacturer 40G QSFP+ AOC Optical module 40G QSFP+ AOC Optical module, QSFP + Active Optical Cables (AOCs
C450-fiber optic cabinet is a high-capacity and high-density fiber distribution frame. It adopts high-quality cold-rolled steel frame/electrolytic plate and electrostatic spraying on the whole surface. It is widely used in small and medium-sized integrated wiring projects, equipment room, intelligent community, telecommunications, school. Such projects enable the connection, distribution and scheduling of fiber-optic lines, and the detachable design makes the products more flexible and simple in application.
GY: Outdoor (field) optical cable for communication T: Filled structure Y: Polyethylene 5: Wrinkled steel strip 3: Polyethylene sheath Fiber optic cable GYTY53, 2~144 fiber, central strength member (steel), jelly filled, fiber-containing loose tube and PP filler (if necessary) stranded, water blocking tape, PE inner sheath, longitudinally covered copolymer coated steel Belt, PE sheath. It has two different types: single-mode GYTY53 cable and multi-mode GYTY53 cable.
Breakout fiber patch cord is used to split 12-core MTP connectors terminated on trunk cable into simplex or duplex connectors. MPO/MTP connector is connected with trunk cable, while simplex or duplex connector on the other side can provide a different fan-out length which is convenient for device connection. Can also say this breakout patch cord is a fiber optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch, or other telecommunication equipment. Having a thick layer of protection, it is used to connect the optical transmitter, receiver, and the terminal box. This is known as "interconnect-style cabling".READ MORE
C220 fiber optic cabinet is a high capacity and high density fiber distribution frame, suitable for the composition and distribution of fibers in optical access network to achieve the fiber optic lines connection, distribution and scheduling. Advanced fiber optic cabling management design to ensure easy installation, construction and maintenance of fiber optic cables and cores. It has the characteristics of beautiful appearance, strong dustproof and anti-interference, and good anti-corrosion performance.