Professional fiber manufacturer from Guangdong province, China. The structure of GYTA53 optical cable is to insert a single-mode or multi-mode optical fiber into a loose tube made of a high modulus polyester material, and the casing is filled with a waterproof compound. A fiber reinforced plastic (FRP) locates in the center of core as a non-metallic strength member.
Description of this 100km CWDM SFP 10G module compatible optical module SFP CWDM Optical module CWDM SFP optical module is a low-cost WDM transmission technology for the access layer of the metropoli
Simplex indoor optical cable is made by evenly applying strands of aramid yarns as the strength member over tight buffer fibers and then is completed with a flame retardant sheath(CPR-Cca).
GPON-1280 Optical modem, WIFI dual-band wireless connection speed up to 300 Mbps at 24 GHz, and dual-band wireless speed up to 1200 Mbps, support 2/3 layer network protocol and high-quality voice transmission. GPON optical network terminals have reliability, good service quality assurance, manageability scalability and flexible networking features.The GPON standard is the ITU-TG.984 series of standards. The development of the GPON standard considers the support for traditional TDM services, and continues to adopt the 125ms fixed frame structure to maintain the 8K timing continuation. In order to support multiple protocols such as ATM, GPON defines a new package structure GEM:GPONEncapsulaTIonMethod. The data of ATM and other protocols can be mixed and encapsulated into frames.GPON is positioned in the telecom industry for multi-service, QoS-guaranteed full-service access needs, and strives to find an optimal, full-service, and most efficient solution, and proposes to "completely and thoroughly open all protocols." reconsider".READ MORE
GPON-4080 Optical modem has the reliability, good quality of service guarantee, manageability, scalability and flexible networking features to meet the requirements of high-speed broadband access. It also has ITUG.984 compliant GPON standards, IGMP functionality, multiple management methods, and compatibility with major OLT vendors. The GPON-4080 Optical modem can also be said to be a modem that translates a computer's digital signals into analog signals that can be transmitted along a regular telephone line, which in turn can be received by another modem on the other end of the line. A computer-readable language. This simple process completes the communication between the two computers.
The 100G QSFp Optical Module integrates the receiver and transmitter paths on one module. At the transmitting end, the four channels of serial data are recovered, retimed, and passed to the four laser drivers. The laser driver controls a 4-distributed feedback laser (DFB) with center wavelengths of 1296 nm, 1300 nm, 1305 nm, and 1309 nm. The optical signal is multiplexed to a single mode fiber through an industry standard LC connector. On the receiving side, the four optical data stream channels are optically demultiplexed by an integrated optical demultiplexer. Each data stream is recovered by the PIN photodetector and transimpedance amplifier and retimed. The module features a hot-swappable electrical interface, low power consumption and MDIO management interface. Designed according to the QSFP Multi-Source Agreement (MSA), the product features a form factor, optical/electrical connection and digital diagnostic interface, and is compliant with the IEEE 802.3bm standard.
Breakout fiber patch cord is used to split 12-core MTP connectors terminated on trunk cable into simplex or duplex connectors. MPO/MTP connector is connected with trunk cable, while simplex or duplex connector on the other side can provide a different fan-out length which is convenient for device connection. Can also say this breakout patch cord is a fiber optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch, or other telecommunication equipment. Having a thick layer of protection, it is used to connect the optical transmitter, receiver, and the terminal box. This is known as "interconnect-style cabling".READ MORE
Optical Fiber Information Panel, the indoor 85mm type FTTH mini fiber optic faceplate employs a compact plug-in design, combines a modern design concept, adopts imported plastic, is of a graceful appearance and applicable for FTTH, FTTO and FTTD, etc., and allows easy use in different instalation environments.The clasp design of the cover has greatly reduced the istallation strength. It is very thin and matches with other A86 panels in homes, and also meet the open or concealed cabling for optical cables. Coordinating with FC strip-type optical adaptor, it generates more options in term of fiber interfaces for users, all SC, LC and SC/FC are usable. In addition, the big diameter wrapping post in the box protects radically in an omnibearing way the optical fiber in the box.
The competitiveness of China's optical modules, optical devices, and optical chips needs to be further improved