The optical fiber unit, Pre-terminated Drop Cable, is positioned in the center.Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides.Then,the cable is completed with a black or color LSZH sheath. It is also called leather cable. It is a new type of user access optical cable. According to the application environment and laying conditions, the cable structure and various technical parameters are reasonably designed. The characteristics of indoor soft cable and self-supporting optical cable are collected. Special equipment is used in conjunction with imported precision mold production. It is the best candidate for FTTX network solution, and it is also suitable for users of other fiber-optic FTTO and FTTB networks. Because the cross-section is like a butterfly, it is called a butterfly cable. Both sides are reinforcing members in the leather line and optical fibers in the middle.
The structure of the self-supporting pre-terminated drop cable is based on the Butterfly cable, and a metal suspension unit is added. With the continuous extension of the optical fiber like the user end, in order to meet the different uses and requirements, and expand the use range of the butterfly-introducing cable, on the basis of the Pre-terminated Drop Cable, a derivative product of the butterfly-introducing has emerged, the most typical one being The Self-supporting Pre-terminated Drop Cable is introduced into the optical cable.READ MORE
The SFP+ optical module is a new generation of 10 Gigabit optical modules that can meet Fibre Channel 8.5G and Ethernet 10G applications in accordance with the ANSI T11 protocol. The SFP+ is about 30% smaller than the previous XFP optical module, which looks the same as an ordinary 1-4G SFP optical module. SFP+ only retains the basic electro-optic and photoelectric conversion functions, which reduces the signal control functions of SerDes, CDR, EDC, MAC, etc. in the original XFP design, which simplifies the design of 10G optical modules and reduces power consumption. SFP+ has significant advantages such as high density, low power consumption and lower system construction cost. The products are widely used in the field of 10 Gigabit Ethernet fiber data communication, and are the mainstream products of 10 Gigabit modules.
The EPON-4081 Opical modem is a type of optical modem. The optical modem refers to a transceiver that converts the optical Ethernet signal into other protocol signals. The optical cat is also called a single-port optical transceiver. It is a product designed for a special user environment. A single E1 or single V.35 or single 10BaseT point-to-point optical transmission terminal device using a pair of optical fibers. EPON-4081 Opical modem, as an optical network terminal product built by FTTH network, the product complies with IEEE802.3ah , WiFi dual-band wireless connection speeds of up to 300 Mbps on 24 GHz, and Has high-quality EPON access capability. The EPON ONU optical network terminal has the characteristics of high reliability, good service quality assurance, manageability,scalability, and flexible networking, which can meet the requirements of high- speed broadband access.
"GY" refers to Outdoor cable for communication, "F" refers to non-metallic reinforcing member, "T" refers to filled structure, and "Y" refers to polyethylene, "53" means Wrinkled steel strip and Polyethylene sheath. The GYFTY53 cable is constructed by inserting a 250μm fiber into a loose tube made of a high-modulus material filled with a water-repellent compound. The center of the core is a non-metallic reinforcing core (FRP). For some cores, a non-metallic reinforcing core needs to be extruded with a layer of polyethylene (PE).
BIDI-SFP optical module: BiDi (Bidirectional): single fiber bidirectional. It uses WDM (ie, wavelength division multiplexing) technology to transmit and receive different center wavelengths in two directions, thereby realizing a bidirectional transmission of optical signals in one fiber. A general optical module has two ports, a TX transmitting port and an RX receiving port, and the BIDI optical module has only one port, which is filtered by a filter in the optical module, and simultaneously performs transmission of a 1310 nm optical signal and reception of a 1550 nm optical signal, or in contrast. Therefore, BIDI modules must be used in pairs. It is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of switches and routers, can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.
Description of this QSFP AOC 40G Active Optical Cable fiber cable optical transceiver module manufacturer 40G QSFP+ AOC Optical module 40G QSFP+ AOC Optical module, QSFP + Active Optical Cables (AOCs
C450-fiber optic cabinet is a high-capacity and high-density fiber distribution frame. It adopts high-quality cold-rolled steel frame/electrolytic plate and electrostatic spraying on the whole surface. It is widely used in small and medium-sized integrated wiring projects, equipment room, intelligent community, telecommunications, school. Such projects enable the connection, distribution and scheduling of fiber-optic lines, and the detachable design makes the products more flexible and simple in application.