The optical fiber unit, Pre-terminated Drop Cable, is positioned in the center.Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides.Then,the cable is completed with a black or color LSZH sheath. It is also called leather cable. It is a new type of user access optical cable. According to the application environment and laying conditions, the cable structure and various technical parameters are reasonably designed. The characteristics of indoor soft cable and self-supporting optical cable are collected. Special equipment is used in conjunction with imported precision mold production. It is the best candidate for FTTX network solution, and it is also suitable for users of other fiber-optic FTTO and FTTB networks. Because the cross-section is like a butterfly, it is called a butterfly cable. Both sides are reinforcing members in the leather line and optical fibers in the middle.
The structure of the self-supporting pre-terminated drop cable is based on the Butterfly cable, and a metal suspension unit is added. With the continuous extension of the optical fiber like the user end, in order to meet the different uses and requirements, and expand the use range of the butterfly-introducing cable, on the basis of the Pre-terminated Drop Cable, a derivative product of the butterfly-introducing has emerged, the most typical one being The Self-supporting Pre-terminated Drop Cable is introduced into the optical cable.READ MORE
GYFTA53 cable, 250um, is positioned in a tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core.
GYDTA uses steel as the central strength member ensures good tensile resistance,and improves the bending performance. It has excellent moisture resistance ability:the loose tube is filled with grease to protect the fiber, APL tape prevent the water ingress, then the cable is completed with PE out sheath. It's suitable for aerial and duct application. Because of the good moisture resistance, it can also be used in cable trench. It has the loose tube structure with ribbon cable, which is surrounded by the APL tape. GYDTA is a good option for interoffice communication,outdoor access network.
The EPON-4081 Opical modem is a type of optical modem. The optical modem refers to a transceiver that converts the optical Ethernet signal into other protocol signals. The optical cat is also called a single-port optical transceiver. It is a product designed for a special user environment. A single E1 or single V.35 or single 10BaseT point-to-point optical transmission terminal device using a pair of optical fibers. EPON-4081 Opical modem, as an optical network terminal product built by FTTH network, the product complies with IEEE802.3ah , WiFi dual-band wireless connection speeds of up to 300 Mbps on 24 GHz, and Has high-quality EPON access capability. The EPON ONU optical network terminal has the characteristics of high reliability, good service quality assurance, manageability,scalability, and flexible networking, which can meet the requirements of high- speed broadband access.
The cat 6e network cable is an upgraded version of the Category 6 network cable, so it is also called “Enhanced Category 6 Network Cable” and complies with the standards of ISO/IEC 11801:2002 and EIA/TIA 568-B.2-1. The performance of the other aspects is better than the six types of network cables. Compared with the six types of network cables, the outer diameter of the cat 6e network cable is larger. The weight is heavier and the minimum bending radius is larger, and the maximum transmission distance of the super six types of network cables is 100m, and it can be compatible with the six types and super five types of network cables.The cat 6e network cables are shielded (UTP) and unshielded (FTP), and there are significant differences in structure between the two.
Description of this QSFP AOC 40G Active Optical Cable fiber cable optical transceiver module manufacturer 40G QSFP+ AOC Optical module 40G QSFP+ AOC Optical module, QSFP + Active Optical Cables (AOCs
Pre-terminated high-precision MPO/MTP patch cord can achieve multi-fiber connectivity. It also can be used for internal frame cabling. MPO/MTP multi-fiber cabling system is ideally suited for a high density environment that demands space saving and innovative cable management solutions. The spring - loaded push/pull locking mechanism of the MPO is easy to handle while guaranteeing the secure mating of the connectors. High- precision guiding pins ensure the exact adjustment of the ferrule. t offered in fiber types in standard 8, 12, 24 or 48 cores versions using a compact , and with multimode and singlemode fibres secure transition between MPO/MTP and LC or SC connections.READ MORE