GPON-4080 Optical modem has the reliability, good quality of service guarantee, manageability, scalability and flexible networking features to meet the requirements of high-speed broadband access. It also has ITUG.984 compliant GPON standards, IGMP functionality, multiple management methods, and compatibility with major OLT vendors. The GPON-4080 Optical modem can also be said to be a modem that translates a computer's digital signals into analog signals that can be transmitted along a regular telephone line, which in turn can be received by another modem on the other end of the line. A computer-readable language. This simple process completes the communication between the two computers.
The EPON-4081 Opical modem is a type of optical modem. The optical modem refers to a transceiver that converts the optical Ethernet signal into other protocol signals. The optical cat is also called a single-port optical transceiver. It is a product designed for a special user environment. A single E1 or single V.35 or single 10BaseT point-to-point optical transmission terminal device using a pair of optical fibers. EPON-4081 Opical modem, as an optical network terminal product built by FTTH network, the product complies with IEEE802.3ah , WiFi dual-band wireless connection speeds of up to 300 Mbps on 24 GHz, and Has high-quality EPON access capability. The EPON ONU optical network terminal has the characteristics of high reliability, good service quality assurance, manageability,scalability, and flexible networking, which can meet the requirements of high- speed broadband access.
The ribbon 12 fibers, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (PE) sheath.
The 40G DAC Optical module is usually a cable assembly that is priced at a fixed length with fixed connectors on both ends. The connector used in the high-speed cable end has the same interface as the optical module, but the connector module on the high-speed cable does not have expensive optical lasers and other electronic components compared to the optical module, thereby greatly saving in short-distance applications. Cost and power consumption, a cost-effective, high-speed data communication solution that replaces optical modules, can be widely used in storage area networks, data centers, and high-performance computer connections by connecting switches to routers or servers.
SFP 25G AOC optical module is a hot-swappable input/output device that plugs into a 25Gigabit Ethernet port or slot, linking the port with the network. SFP+s can be used and interchanged on a wide variety of switches and routers, can be intermixed in combinations of 1x InfiniBand QDR, DDR, SDR, 10G Gigabit Ethernet, Fibre Channel On a port-by-port basis.We are dedicated to providing customers with outstanding, standards-compliant products and services. CCOFC has passed many quality system verifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service.
OC144-Cross Connecting Cabinet is an outdoor optical equipment that is especially designed for outdoor optical nodes in access net work. The cabinet has the functions of optical fiber cable splice, distribution, splitter holding, storage and dispatch. It has great performance of resisting the open-air environment and can resist severe climatic changes and serious working environment. The protection grade reaches IP65.
Planar lightwave circuit PLC splitter is a type of optical power management device that is fabricated using silica optical waveguide technology.It features small size,high reliability,wide operating wavelength range and good channel-to-channel uniformity,and is widely used in PON networks to realize optical signal power splitting. Bare PLC splitter is putting PLC splitter chip and input, output optical fiber array in a square metal tube, out with the diameter of 0.9mm or 250um bare fiber ,fiber can be welded, can also be processing various types of optical fiber connector. We provides whole series of 1*N and 2*N splitter products that are tailored for specific applications.All products meet "YD/T1117-2001 All optical fiber branching device technical conditions","YD-T 2000-209 PLC Integrated optical devices PLC optical power splitter"etc, and are certified by TLC for network deployment.
GY: Outdoor optical cable for communication F: Non-metallic reinforcing member T: Filled structure A: Aluminum-polyethylene bonding layer The GYFTA fiber is single/multi mode fiber, stranded loose tube cable with aluminum and steel tape. It can be used for duct and direct buried application. Particularly suitable for occasions where good mechanical properties and rodent resistance are expected.