Cat5 is a twisted pair cable used in computer networks. It is also a multimedia cable used in information and voice services such as data and voice. It is widely used in Ethernet and broadband access projects. Its quality is directly and inferior. It is related to the transmission quality of information communication. However, due to the development of optical fiber and communication technology, the impact of twisted pair on communication quality is also gradually reduced.The cat5 network cable will be marked with the word "CAT5" and the transmission bandwidth is 100MHz. It is used for voice transmission and data transmission with a maximum transmission rate of 100Mbps.
This kind of cable use bare copper to be the center conduction with the Specification is 24AWG and PE to be the dielectric. The jacket is made of Fireproof material, which is so meanful to the Cat5e communication. This Cat5e SFTP cable is conform to the SIO/IEC, TIA/EIA and EN standards. And the electrical characteristics are exceed the lastest Cat5e standards.
Fluke passed and Factory lowest price UTP CAT6 Ethernet cable/Network cable 4Pr 24 AWG BC/CCA/CCS/CCAG 305m/roll wholesale CCOFC factory is a professional manufacturer in producing Cat6 UTP/FTP/SFTP/STP/SFFTP/FFTP network cable, Power cable, Coaxial cable, Telephone cable etc. The cat6 network cable are applied to the wiring between the user communication terminal of the residential integrated wiring system and the distribution frame and the distribution frame between the communication terminal of the work area and the junction between the distribution wiring system, and are suitable for high-speed local area network, which is suitable for 240MHz channel bandwidth communication. The cross-shaped conductor divider design enhances near-end crosstalk and impedance performance, increasing bandwidth and signal-to-noise margin.
The cat 6e network cable is an upgraded version of the Category 6 network cable, so it is also called “Enhanced Category 6 Network Cable” and complies with the standards of ISO/IEC 11801:2002 and EIA/TIA 568-B.2-1. The performance of the other aspects is better than the six types of network cables. Compared with the six types of network cables, the outer diameter of the cat 6e network cable is larger. The weight is heavier and the minimum bending radius is larger, and the maximum transmission distance of the super six types of network cables is 100m, and it can be compatible with the six types and super five types of network cables.The cat 6e network cables are shielded (UTP) and unshielded (FTP), and there are significant differences in structure between the two.
OC576-Cross Connecting Cabinet is used for outdoor cable access network ,backbone cable and indoor cable arrangement,it with high-capacity,high -density fiber distribution tray,suitable for the composition,splice and distribution of fibers in optical access network to achieve the fiber optic lines connection,distribution and scheduling. The ODF is used for the termination and distribution of the central trunk optical cable in the optical fiber communication system, and the connection, distribution and scheduling of the optical fiber line can be conveniently realized. Suitable for small to medium-sized wiring systems from fiber to cell, fiber to building, remote module office and wireless base station.
GYDTA uses steel as the central strength member ensures good tensile resistance,and improves the bending performance. It has excellent moisture resistance ability:the loose tube is filled with grease to protect the fiber, APL tape prevent the water ingress, then the cable is completed with PE out sheath. It's suitable for aerial and duct application. Because of the good moisture resistance, it can also be used in cable trench. It has the loose tube structure with ribbon cable, which is surrounded by the APL tape. GYDTA is a good option for interoffice communication,outdoor access network.
Breakout Fiber Optic Cable is also called Large-core hybrid branch cable. The cable uses an 8-core sub-unit(900μm tight fitting fiber, an aramid reinforcing element) and a non-metallic center reinforcing core. The cable sub-unit layer is twisted on the center reinforcing core form a cable core, and the outer most layer is extruded with a polyvinyl chloride(PVC) sheathed LSZH or other agreed material jackets are also available upon request. For termination and maintenance, the drop cable facilitates independent routing or branching of the individual fibers.
GY: Outdoor optical cable for communication F: Non-metallic reinforcing member T: Filled structure A: Aluminum-polyethylene bonding layer The GYFTA fiber is single/multi mode fiber, stranded loose tube cable with aluminum and steel tape. It can be used for duct and direct buried application. Particularly suitable for occasions where good mechanical properties and rodent resistance are expected.