Call us at +86 13377766112

Products: network cable brands

Telecom communication Cable 5 types of network Cable factory

Telecom communication Cable 5 types of network Cable factory

Cat5 is a twisted pair cable used in computer networks. It is also a multimedia cable used in information and voice services such as data and voice. It is widely used in Ethernet and broadband access projects. Its quality is directly and inferior. It is related to the transmission quality of information communication. However, due to the development of optical fiber and communication technology, the impact of twisted pair on communication quality is also gradually reduced.The cat5 network cable will be marked with the word "CAT5" and the transmission bandwidth is 100MHz. It is used for voice transmission and data transmission with a maximum transmission rate of 100Mbps.

READ MORE
Internet cat 5e patch cord Ethernet Lan Network wire RJ45 plugs

Internet cat 5e patch cord Ethernet Lan Network wire RJ45 plugs

This kind of cable use bare copper to be the center conduction with the Specification is 24AWG and PE to be the dielectric. The jacket is made of Fireproof material, which is so meanful to the Cat5e communication. This Cat5e SFTP cable is conform to the SIO/IEC, TIA/EIA and EN standards. And the electrical characteristics are exceed the lastest Cat5e standards.

READ MORE
Lszh jacket drop cable UTF Cat6 network cable manufactory from China

Lszh jacket drop cable UTF Cat6 network cable manufactory from China

Fluke passed and Factory lowest price UTP CAT6 Ethernet cable/Network cable 4Pr 24 AWG BC/CCA/CCS/CCAG 305m/roll wholesale CCOFC factory is a professional manufacturer in producing Cat6 UTP/FTP/SFTP/STP/SFFTP/FFTP network cable, Power cable, Coaxial cable, Telephone cable etc. The cat6 network cable are applied to the wiring between the user communication terminal of the residential integrated wiring system and the distribution frame and the distribution frame between the communication terminal of the work area and the junction between the distribution wiring system, and are suitable for high-speed local area network, which is suitable for 240MHz channel bandwidth communication. The cross-shaped conductor divider design enhances near-end crosstalk and impedance performance, increasing bandwidth and signal-to-noise margin.

READ MORE
User defined length Network Cable Cat 6e

User defined length Network Cable Cat 6e

The cat 6e network cable is an upgraded version of the Category 6 network cable, so it is also called “Enhanced Category 6 Network Cable” and complies with the standards of ISO/IEC 11801:2002 and EIA/TIA 568-B.2-1. The performance of the other aspects is better than the six types of network cables. Compared with the six types of network cables, the outer diameter of the cat 6e network cable is larger. The weight is heavier and the minimum bending radius is larger, and the maximum transmission distance of the super six types of network cables is 100m, and it can be compatible with the six types and super five types of network cables.The cat 6e network cables are shielded (UTP) and unshielded (FTP), and there are significant differences in structure between the two.

READ MORE
100G QSFP Dual LC LWDM 10KM Optical Communication QSFP Module

100G QSFP Dual LC LWDM 10KM Optical Communication QSFP Module

The 100G QSFp Optical Module integrates the receiver and transmitter paths on one module. At the transmitting end, the four channels of serial data are recovered, retimed, and passed to the four laser drivers. The laser driver controls a 4-distributed feedback laser (DFB) with center wavelengths of 1296 nm, 1300 nm, 1305 nm, and 1309 nm. The optical signal is multiplexed to a single mode fiber through an industry standard LC connector. On the receiving side, the four optical data stream channels are optically demultiplexed by an integrated optical demultiplexer. Each data stream is recovered by the PIN photodetector and transimpedance amplifier and retimed. The module features a hot-swappable electrical interface, low power consumption and MDIO management interface. Designed according to the QSFP Multi-Source Agreement (MSA), the product features a form factor, optical/electrical connection and digital diagnostic interface, and is compliant with the IEEE 802.3bm standard.

READ MORE
EOC 4050 Optical modem

EOC 4050 Optical modem

Description of this EOC 4050 Optical modem EOC-4050 Optical modem, as an Ethernet coaxial terminal product, it supports four 100M Ethernet networks and works with EOC master in Ethernet over coax net

READ MORE
Telecom communication 100G AOC Optical module factory price per piece

Telecom communication 100G AOC Optical module factory price per piece

100G AOC active optical cable refers to a communication cable that needs to use external energy to convert electrical signals into optical signals or convert optical signals into electrical signals. The optical transceivers at both ends of the optical cable provide photoelectric conversion and optical transmission functions. And the transmission rate reaches 100Gb/s. 100G AOC Optical module This module has a photoelectric conversion device inside, which can convert electrical signals into optical signals with a transmission distance of up to 100 meters. The product has one to four channels, each with a transmission rate of 25.3125 Gb / s and a rate of 100 Gb / s. Its low power consumption, low bit error rate, easy management, high performance, etc. are widely used in short-distance high-speed connections, such as 100 Gigabit Ethernet, 100 Gigabit switches, 100 Gigabit servers, supercomputers, cloud computing and cloud storage.

READ MORE
GPON 1280 Optical modem

GPON 1280 Optical modem

GPON-1280 Optical modem, WIFI dual-band wireless connection speed up to 300 Mbps at 24 GHz, and dual-band wireless speed up to 1200 Mbps, support 2/3 layer network protocol and high-quality voice transmission. GPON optical network terminals have reliability, good service quality assurance, manageability scalability and flexible networking features.The GPON standard is the ITU-TG.984 series of standards. The development of the GPON standard considers the support for traditional TDM services, and continues to adopt the 125ms fixed frame structure to maintain the 8K timing continuation. In order to support multiple protocols such as ATM, GPON defines a new package structure GEM:GPONEncapsulaTIonMethod. The data of ATM and other protocols can be mixed and encapsulated into frames.GPON is positioned in the telecom industry for multi-service, QoS-guaranteed full-service access needs, and strives to find an optimal, full-service, and most efficient solution, and proposes to "completely and thoroughly open all protocols." reconsider".

READ MORE