Call us at +86 13377766112

Products: network unit Modem

EOC 3050 Optical modem

EOC 3050 Optical modem

EOC-3050 Optical modem, as an Ethernet coaxial terminal product, Ethernet access is performed using a coaxial cable. The EoC terminal device has built-in WiFi wireless function, including three 100M Ethermet ports and one high- quality voice interface, which can support various data access requirements such as pure data, data +voice, data + voice + WIFI.

READ MORE
Horizontal Type Splice Closure

Horizontal Type Splice Closure

The Horizontal Type Splice Closure is a mechanical pressure seal joint system, which is a joint protection device that provides optical, sealing and mechanical strength continuity between adjacent cables. It is mainly used for straight-through and branch connection of overhead, pipeline, direct burial and other laying methods applicable to various structural optical cables. The box body is made of reinforced plastic, high strength and corrosion resistance. The splice closure is suitable for connection in the terminal room of the structural fiber optic cable. The structure is mature, the seal is reliable, and the construction is convenient. Widely used in communications, network systems, CATV cable TV, fiber optic cable network systems, and more.

READ MORE
Stranded Layer Non Armored Ribbon Fiber GYFDTA

Stranded Layer Non Armored Ribbon Fiber GYFDTA

GYFDTA uses FRP as the central strength member ensures good tensile resistance,and improves the bending performance.The middle layer of aramid yarn increases the tensile strength of the cable. It has excellent moisture resistance ability:the loose tube is filled with grease to protect the fiber, APL tape prevent the water ingress, then the cable is completed with PE out sheath. It's suitable for aerial and duct application. Because of the good moisture resistance, it can also be used in cable trench. It has the loose tube structure with ribbon cable, which is surrounded by the APL tape. GYFDTA is a good option for interoffice communication,outdoor access network

READ MORE
Optical Fiber Terminal Box

Optical Fiber Terminal Box

FTTH optical fiber terminal box, outdoor optical fiber terminal box is used in wiring connection between optical cable and optical communication equipment, through adapter in distribution box, optical fiber jumper leads optical signal, realize optical wiring function, and can meet the optical splitter placed to achieve spectral function.FTTH terminal box from Foclink is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for mini-network terminal distribution, in which the optical cables, patch cores or pigtails are connected.

READ MORE
China Supplier outdoors ADSS fiber optic cable

China Supplier outdoors ADSS fiber optic cable

ADSS cable, the all-media self-supporting optical cable is a non-metallic optical cable which is composed entirely of dielectric materials and contains the necessary support system and can be directly suspended on the power pole. Fibers, 250μm, are positioned in a loose tube made of a high modulus plastics. The tubes are filled with a water-resistant filling compound.

READ MORE
Figure 8 Fiber Optic Cable

Figure 8 Fiber Optic Cable

2fiber, Figure-8 structure,900μm or 600μm tight buffer fiber, Aramid yarn, PVC jacket.Speak in detail, the figure-8fiber optic cable uses two Φ900μm or Φ600μm flame-retardant tight-fitting optical fibers as the optical transmission medium, and is covered with a layer of aramid as the force-strengthening unit, and extruded a layer of 8-shaped polyvinyl chloride (PVC) or low-smoke. Halogen-free material (LSZH, low-smoke, halogen-free, flame retardant) sheathed.

READ MORE
Discounts LC connector 850 1310 1550nm optic Sfp dwdm  optic transceiver module

Discounts LC connector 850 1310 1550nm optic Sfp dwdm optic transceiver module

The SFP+ DWDM optical module adopts an LC optical port and is compatible with IEEE802.3ae and SFF-8472. It has low power consumption, small size, and high speed. The SFP+DWDM optical module is capable of combining a set of optical wavelengths for transmission using one fiber. SFP+DWDM is a wavelength division multiplexing technology that can couple different wavelengths of light into a single-core fiber for transmission. SFP+DWDM requires less spacing and requires additional wavelength control devices. The advantage of SFP+DWDM is that its protocol and transmission speed are irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols, and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit different types of data traffic at different speeds on a single laser channel. Mainly used in data center interconnection, SONET/SDH, metropolitan area network, 4G LET wireless network, transmission network, high-speed point-to-point link, Fibre Channel and other environments.

READ MORE
Telecom communication Cable 5 types of network Cable factory

Telecom communication Cable 5 types of network Cable factory

Cat5 is a twisted pair cable used in computer networks. It is also a multimedia cable used in information and voice services such as data and voice. It is widely used in Ethernet and broadband access projects. Its quality is directly and inferior. It is related to the transmission quality of information communication. However, due to the development of optical fiber and communication technology, the impact of twisted pair on communication quality is also gradually reduced.The cat5 network cable will be marked with the word "CAT5" and the transmission bandwidth is 100MHz. It is used for voice transmission and data transmission with a maximum transmission rate of 100Mbps.

READ MORE