If you are interested in non metal optical cable, Guangdong changcheng communication Technology Co.,Ltd If you are interested in 1related results, so you can compare and shop! Try finding the one that is right for you by choosing the price range, brand, or specifications that meet your needs.
J: Optical fiber tight covering structure, E: Elliptical shape, T: Filled structure JET outdoor fiber optic cable, 250μm, either of single-mode or multi-mode type, are positioned in a loose tube made of a high modulus plastic. The center of the cable core is a non-metallic reinforcing core (FRP) and reinforced core with water blocking yarn A layer of aramid yarn or high strength glass is applied around the cable core as additional strength member. The tubes are filled with a water-resistant filling compound. Then, the cable is completed with a black or color sheath.The original overhead line is used for long-distance communication and inter-office communication lines. Different types of aerial cables are suitable for hanging wire and self-supporting.
Professional fiber manufacturer from Guangdong province, China. The structure of GYTA53 optical cable is to insert a single-mode or multi-mode optical fiber into a loose tube made of a high modulus polyester material, and the casing is filled with a waterproof compound. A fiber reinforced plastic (FRP) locates in the center of core as a non-metallic strength member.
SFP DAC Optical module, as one kind of optical transceiver assembly, a direct attach cable (DAC) is used to connect one mobility access switch with another when forming a stack, which can be either passive or active. Since the passive DAC contains no active components, it provides a direct electrical connection between corresponding cable ends. This process can also be done by an active DAC that is considered active because there are optics and/or electronics embedded within the connectors. Thus it helps to improve signal quality and provide a longer cable distance.
The 40G optical module refers to an optical module with a transmission rate of 40 Gbps. CFP and QSFP are the main package types, and the 40G QSFP optical module is one of the most widely used. The 40G QSFP+ optical module is typically used with LC single-mode fiber patch cords for transmission distances up to 10km, and it has four data channels that simultaneously transmit data. It works by the laser driver controlling the wavelength of arrival, and the optical signals are then multiplexed and combined for transmission. When the receiver arrives at the receiving end, the transmitted signals are decomposed into four channels with a transmission rate of 10 Gbps, and then the PIN detector or transimpedance amplifier recovers the data stream and then transmits the optical signal.
Fiber optic patch panel is also called fiber distribution panel. Its main function is to terminate the fiber optic cable and provide connection access to the cable’s individual fibers. Fiber patch panels are termination units, which are designed to provide a secure, organized chamber for housing connectors and splice units. Fiber patch panels are available in rack mounted or wall mounted. Both types can house, organize, manage and protect fiber optic cable, splices and connectors. Rack mount panels is usually 19" or 23" universal width. The height of patch panel can be 1U, 2U, 3U, 4U, 6U, etc. The opening of the optical fiber patch panels can be slidable or fixed or revolving. Wall mount patch panel is more customized, it can be any structure and dimension. And the patch panels can be used for indoor or outdoor application.
GY: Outdoor communication cable T: Filled structure C: Self-supporting structure 8: 8-shaped A: Aluminum-polyethylene bonded sheath The structure of the GYTC8A cable is to insert a single-mode or multi-mode fiber into a loose tube made of a high-modulus material filled with a waterproof compound. The center of the core is a metal reinforcement.
The 40G DAC Optical module is usually a cable assembly that is priced at a fixed length with fixed connectors on both ends. The connector used in the high-speed cable end has the same interface as the optical module, but the connector module on the high-speed cable does not have expensive optical lasers and other electronic components compared to the optical module, thereby greatly saving in short-distance applications. Cost and power consumption, a cost-effective, high-speed data communication solution that replaces optical modules, can be widely used in storage area networks, data centers, and high-performance computer connections by connecting switches to routers or servers.
GY: Outdoor (field) optical cable for communication T: Filled structure Y: Polyethylene 5: Wrinkled steel strip 3: Polyethylene sheath Fiber optic cable GYTY53, 2~144 fiber, central strength member (steel), jelly filled, fiber-containing loose tube and PP filler (if necessary) stranded, water blocking tape, PE inner sheath, longitudinally covered copolymer coated steel Belt, PE sheath. It has two different types: single-mode GYTY53 cable and multi-mode GYTY53 cable.