GPON-1080 optical modem constructed as a FTTH network conforms to the ITU-T G.984 standard, GPON optical network terminals are characterized by reliability, good service quality assurance, manageability, scalability and flexible networking. Can meet the access requirement of high-speed broadband.
100G AOC active optical cable refers to a communication cable that needs to use external energy to convert electrical signals into optical signals or convert optical signals into electrical signals. The optical transceivers at both ends of the optical cable provide photoelectric conversion and optical transmission functions. And the transmission rate reaches 100Gb/s. 100G AOC Optical module This module has a photoelectric conversion device inside, which can convert electrical signals into optical signals with a transmission distance of up to 100 meters. The product has one to four channels, each with a transmission rate of 25.3125 Gb / s and a rate of 100 Gb / s. Its low power consumption, low bit error rate, easy management, high performance, etc. are widely used in short-distance high-speed connections, such as 100 Gigabit Ethernet, 100 Gigabit switches, 100 Gigabit servers, supercomputers, cloud computing and cloud storage.
Fluke passed and Factory lowest price UTP CAT6 Ethernet cable/Network cable 4Pr 24 AWG BC/CCA/CCS/CCAG 305m/roll wholesale CCOFC factory is a professional manufacturer in producing Cat6 UTP/FTP/SFTP/STP/SFFTP/FFTP network cable, Power cable, Coaxial cable, Telephone cable etc. The cat6 network cable are applied to the wiring between the user communication terminal of the residential integrated wiring system and the distribution frame and the distribution frame between the communication terminal of the work area and the junction between the distribution wiring system, and are suitable for high-speed local area network, which is suitable for 240MHz channel bandwidth communication. The cross-shaped conductor divider design enhances near-end crosstalk and impedance performance, increasing bandwidth and signal-to-noise margin.
OC576-Cross Connecting Cabinet is used for outdoor cable access network ,backbone cable and indoor cable arrangement,it with high-capacity,high -density fiber distribution tray,suitable for the composition,splice and distribution of fibers in optical access network to achieve the fiber optic lines connection,distribution and scheduling. The ODF is used for the termination and distribution of the central trunk optical cable in the optical fiber communication system, and the connection, distribution and scheduling of the optical fiber line can be conveniently realized. Suitable for small to medium-sized wiring systems from fiber to cell, fiber to building, remote module office and wireless base station.
Outdoor armoured FTTA water-proof patch cord are used to jump from the device to the fiber optic cabling link. There is a thick protective layer, generally used in the optical terminal and the box between the connection, used in fiber communication systems , fiber access network, optical fiber data transmission and LAN and other areas. Armored outdoor fiber patch cord is used for the antenna, and base station far transmission. Fiber optic patch cable is kind of indoor and outdoor patch cord, built on LSZH cable with 7.0mm diameter, with water blocking aramid yarns and UV resistant black out jacket. Produces FULL ARMOURED patch cord for harsh environment, especially for rodent resistance and bird resistance.
Professional fiber manufacturer from Guangdong province, China. The structure of GYTA53 optical cable is to insert a single-mode or multi-mode optical fiber into a loose tube made of a high modulus polyester material, and the casing is filled with a waterproof compound. A fiber reinforced plastic (FRP) locates in the center of core as a non-metallic strength member.
GYFTA53 cable, 250um, is positioned in a tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core.
DWDM (DWDM: Dense Wavelength Division Multiplexing) is a combination of a set of optical wavelengths that can be transmitted by one fiber. DWDM SFP is a wavelength division multiplexing technology that can couple different wavelengths of light into a single-core fiber for transmission. The channel spacing of the DWDM SFP is 0.4 nm, 0.8 nm, 1.6 nm, etc., and the spacing is small, requiring additional wavelength control devices. A key advantage of the DWDM SFP is that its protocol and transmission speed are irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols, and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit different types of data traffic at different speeds on a single laser channel. From a QoS (Quality Service) perspective, DWDM-based networks respond quickly to customer bandwidth requirements and protocol changes in a cost-effective manner.