GPON-2480 Optical modem are manufactured and developed by ccofc company, which is a leader in FTTH/ FTTO broadband access network field. They are properly manageable added with features such as high-bandwidth, high reliability, low power consumption and satisfy the users requirement to access broadband, voice, data and video etc. The optical network terminal product constructed as a FTTH network conforms to the ITU-T G.984 standard, and has dual-band wireless speeds up to 1200 Mbps, supporting LC/L3 layer network protocols and high-quality voice transmission.
The SFP+ DWDM optical module adopts an LC optical port and is compatible with IEEE802.3ae and SFF-8472. It has low power consumption, small size, and high speed. The SFP+DWDM optical module is capable of combining a set of optical wavelengths for transmission using one fiber. SFP+DWDM is a wavelength division multiplexing technology that can couple different wavelengths of light into a single-core fiber for transmission. SFP+DWDM requires less spacing and requires additional wavelength control devices. The advantage of SFP+DWDM is that its protocol and transmission speed are irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols, and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit different types of data traffic at different speeds on a single laser channel. Mainly used in data center interconnection, SONET/SDH, metropolitan area network, 4G LET wireless network, transmission network, high-speed point-to-point link, Fibre Channel and other environments.
Fiber optic patch panel is modulized design with Swing tray inside.Each Swing tray can splice 24fibers. It could be pre-installed with various kinds of fiber optic adapters and pigtails. It is ideal for indoor fiber optic cables connection storage, distribution and management.
BIDI-SFP optical module: BiDi (Bidirectional): single fiber bidirectional. It uses WDM (ie, wavelength division multiplexing) technology to transmit and receive different center wavelengths in two directions, thereby realizing a bidirectional transmission of optical signals in one fiber. A general optical module has two ports, a TX transmitting port and an RX receiving port, and the BIDI optical module has only one port, which is filtered by a filter in the optical module, and simultaneously performs transmission of a 1310 nm optical signal and reception of a 1550 nm optical signal, or in contrast. Therefore, BIDI modules must be used in pairs. It is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. SFPs can be used and interchanged on a wide variety of switches and routers, can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.
Fluke passed and Factory lowest price UTP CAT6 Ethernet cable/Network cable 4Pr 24 AWG BC/CCA/CCS/CCAG 305m/roll wholesale CCOFC factory is a professional manufacturer in producing Cat6 UTP/FTP/SFTP/STP/SFFTP/FFTP network cable, Power cable, Coaxial cable, Telephone cable etc. The cat6 network cable are applied to the wiring between the user communication terminal of the residential integrated wiring system and the distribution frame and the distribution frame between the communication terminal of the work area and the junction between the distribution wiring system, and are suitable for high-speed local area network, which is suitable for 240MHz channel bandwidth communication. The cross-shaped conductor divider design enhances near-end crosstalk and impedance performance, increasing bandwidth and signal-to-noise margin.
The EPON-4081 Opical modem is a type of optical modem. The optical modem refers to a transceiver that converts the optical Ethernet signal into other protocol signals. The optical cat is also called a single-port optical transceiver. It is a product designed for a special user environment. A single E1 or single V.35 or single 10BaseT point-to-point optical transmission terminal device using a pair of optical fibers. EPON-4081 Opical modem, as an optical network terminal product built by FTTH network, the product complies with IEEE802.3ah , WiFi dual-band wireless connection speeds of up to 300 Mbps on 24 GHz, and Has high-quality EPON access capability. The EPON ONU optical network terminal has the characteristics of high reliability, good service quality assurance, manageability,scalability, and flexible networking, which can meet the requirements of high- speed broadband access.
GPON-4080 Optical modem has the reliability, good quality of service guarantee, manageability, scalability and flexible networking features to meet the requirements of high-speed broadband access. It also has ITUG.984 compliant GPON standards, IGMP functionality, multiple management methods, and compatibility with major OLT vendors. The GPON-4080 Optical modem can also be said to be a modem that translates a computer's digital signals into analog signals that can be transmitted along a regular telephone line, which in turn can be received by another modem on the other end of the line. A computer-readable language. This simple process completes the communication between the two computers.
The EPON-4080 Optical modem is an EPON terminal that can be used in FTTH scenarios. It is small in size and light in weight. It is easy to be used in the construction of the network box and the upgrade of the old network. It has a 10/100/1000Mbps interface, providing users with high-speed data services and high-quality video services, and remote service delivery and failure through OMCI. Diagnostics and performance statistics to effectively reduce operating and maintenance costs. As an optical network terminal product built by FTTH network, the product conforms to IEEE802.3ah, 24 GHz WiFi dual-band wireless connection rate up to 300 Mbps, and has high-quality EPON access capability. EPON optical network terminals have the characteristics of high reliability, good service quality, strong management capability, strong scalability, flexible networking, etc., which can meet the needs of high-speed broadband access.