GY: Outdoor communication cable T: Filled structure C: Self-supporting structure 8: 8-shaped A: Aluminum-polyethylene bonded sheath The structure of the GYTC8A cable is to insert a single-mode or multi-mode fiber into a loose tube made of a high-modulus material filled with a waterproof compound. The center of the core is a metal reinforcement.
GY: Outdoor (field) optical cable for communication T: Filled structure Y: Polyethylene 5: Wrinkled steel strip 3: Polyethylene sheath Fiber optic cable GYTY53, 2~144 fiber, central strength member (steel), jelly filled, fiber-containing loose tube and PP filler (if necessary) stranded, water blocking tape, PE inner sheath, longitudinally covered copolymer coated steel Belt, PE sheath. It has two different types: single-mode GYTY53 cable and multi-mode GYTY53 cable.
OC576-Cross Connecting Cabinet is used for outdoor cable access network ,backbone cable and indoor cable arrangement,it with high-capacity,high -density fiber distribution tray,suitable for the composition,splice and distribution of fibers in optical access network to achieve the fiber optic lines connection,distribution and scheduling. The ODF is used for the termination and distribution of the central trunk optical cable in the optical fiber communication system, and the connection, distribution and scheduling of the optical fiber line can be conveniently realized. Suitable for small to medium-sized wiring systems from fiber to cell, fiber to building, remote module office and wireless base station.
EOC-4051 Optical modem fully complies with the IEEE P1901 standard and China Telecom EOC equipment technical requirements. It has the characteristics of carrier-class operation, manageability and easy maintenance. It is a bridge-type home-side device and realizes ultra-wideband for home/SOHO users through EOC technology. Access. It has one PON uplink interface connected to the central office equipment through optical fibers. The structure is small, supporting the placement of the desktop, wall hanging or placed in the corridor information box. As an Ethernet coaxial terminal product, Ethernet access is performed using a coaxial cable. The EoC terminal device has a built-in Wifi wireless function and includes four 100M Ethernet ports for works with EOC master in Ethernet over coax network.Ability to provide high quality Internet access, voice, IPTV, VoIP and video surveillance.
"GY" means outdoor optical cable for communication, "F" means non-metallic reinforcing member, "T" means ointment filling structure, "Y" means polyethylene sheath. GYFTY is positioned in a loose tube made of a high modulus plastic. At the center of the core is a fiberglass reinforced plastic (FRP), and the loose tube (and the filling rope) is twisted around the central reinforcing core into a compact and round core with a gap in the core filled with a water-blocking filler. The outer core of the cable is extruded with a polyethylene inner sheath to form a cable.
The 100G QSFp Optical Module integrates the receiver and transmitter paths on one module. At the transmitting end, the four channels of serial data are recovered, retimed, and passed to the four laser drivers. The laser driver controls a 4-distributed feedback laser (DFB) with center wavelengths of 1296 nm, 1300 nm, 1305 nm, and 1309 nm. The optical signal is multiplexed to a single mode fiber through an industry standard LC connector. On the receiving side, the four optical data stream channels are optically demultiplexed by an integrated optical demultiplexer. Each data stream is recovered by the PIN photodetector and transimpedance amplifier and retimed. The module features a hot-swappable electrical interface, low power consumption and MDIO management interface. Designed according to the QSFP Multi-Source Agreement (MSA), the product features a form factor, optical/electrical connection and digital diagnostic interface, and is compliant with the IEEE 802.3bm standard.
Breakout Fiber Optic Cable is also called Large-core hybrid branch cable. The cable uses an 8-core sub-unit(900μm tight fitting fiber, an aramid reinforcing element) and a non-metallic center reinforcing core. The cable sub-unit layer is twisted on the center reinforcing core form a cable core, and the outer most layer is extruded with a polyvinyl chloride(PVC) sheathed LSZH or other agreed material jackets are also available upon request. For termination and maintenance, the drop cable facilitates independent routing or branching of the individual fibers.
Fiber optic adapters, also known as fiber optic couplers, are a special type of passive component designed to fit or connect the ends of a fiber optic cable with high precision. They are sometimes named as matching sleeves and hybrid adapters. The mating sleeve means that the fiber optic adapter is used to connect the same type of fiber optic connector, and the hybrid adapter is the type of fiber optic adapter used to connect different types of fiber optic connectors. The fiber adapter is paired with two ends of different fiber connectors to realize conversion between different connectors FC, SC, ST, LC, MTRJ, MPO, E2000, and the like. They are widely used in optical distribution frames (ODF), fiber optic communication equipment and equipment, with excellent performance and good stability.