GPON-1080 optical modem constructed as a FTTH network conforms to the ITU-T G.984 standard, GPON optical network terminals are characterized by reliability, good service quality assurance, manageability, scalability and flexible networking. Can meet the access requirement of high-speed broadband.
The Insert Type PLC Splitters is branching devices that is used to distribute optical signals to multiple locations for processing. In optical networks, it is often necessary to split an optical signal into many identical signals, or to combine many signals into a single signal. PLC Splitter (Planar lightwave circuit splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. They are designed for FTTx Passive Optical Networks, CWDM, DWDM and optical cable TV System. PLC Splitter is responsible to distribute optical signals from Central Office (CO) to multiple premise locations.We provides whole series of 1*N and 2*N splitter products that are tailored for specific applications. All prodcts meet GR-1209-CORE-2001 and GR-1221-CORE-1999 requirements.
GYFTA53 cable, 250um, is positioned in a tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core.
The SFP+ optical module is a new generation of 10 Gigabit optical modules that can meet Fibre Channel 8.5G and Ethernet 10G applications in accordance with the ANSI T11 protocol. The SFP+ is about 30% smaller than the previous XFP optical module, which looks the same as an ordinary 1-4G SFP optical module. SFP+ only retains the basic electro-optic and photoelectric conversion functions, which reduces the signal control functions of SerDes, CDR, EDC, MAC, etc. in the original XFP design, which simplifies the design of 10G optical modules and reduces power consumption. SFP+ has significant advantages such as high density, low power consumption and lower system construction cost. The products are widely used in the field of 10 Gigabit Ethernet fiber data communication, and are the mainstream products of 10 Gigabit modules.
The SFP+ DWDM optical module adopts an LC optical port and is compatible with IEEE802.3ae and SFF-8472. It has low power consumption, small size, and high speed. The SFP+DWDM optical module is capable of combining a set of optical wavelengths for transmission using one fiber. SFP+DWDM is a wavelength division multiplexing technology that can couple different wavelengths of light into a single-core fiber for transmission. SFP+DWDM requires less spacing and requires additional wavelength control devices. The advantage of SFP+DWDM is that its protocol and transmission speed are irrelevant. The DWDM-based network can transmit data using IP protocol, ATM, SONET/SDH, and Ethernet protocols, and the processed data traffic is between 100Mb/s and 400Gb/s. In this way, a DWDM-based network can transmit different types of data traffic at different speeds on a single laser channel. Mainly used in data center interconnection, SONET/SDH, metropolitan area network, 4G LET wireless network, transmission network, high-speed point-to-point link, Fibre Channel and other environments.
GPON-2480 Optical modem are manufactured and developed by ccofc company, which is a leader in FTTH/ FTTO broadband access network field. They are properly manageable added with features such as high-bandwidth, high reliability, low power consumption and satisfy the users requirement to access broadband, voice, data and video etc. The optical network terminal product constructed as a FTTH network conforms to the ITU-T G.984 standard, and has dual-band wireless speeds up to 1200 Mbps, supporting LC/L3 layer network protocols and high-quality voice transmission.
Fiber patch cords are fiber-optic cables with connectors on both ends that can be connected directly to a computer or other network device. Fiber patch cords are commonly used to connect light emitting devices, light receiving devices, and fiber optic terminal boxes. Single-mode fiber patch cord cores are particularly small in diameter, typically only 9 μm, and have only one light propagation path. It is for this reason that light can only be transmitted along the axis of the fiber, thereby completely avoiding the waste of dispersion and light energy.
OC280-Cross Connecting Cabinet is use for outdoor cable access network,backbone cable and indoor cable arangement,it with high-capacity,high-density fiber distribution tray,suitable for the composition,splice and distribution of fibers in optical access network to achieve the fiber optic lines connection,distributing and scheduling.It features a fully enclosed cabinet that is aesthetically pleasing; has many features such as secure fiber storage and preventability. Moreover, the cabinet logo is clear, and the connection and distribution of each fiber have obvious signals, which can meet the needs of the ribbon fiber cable and the non-ribbon fiber cable at that time.