Call us at +86 13377766112

Products: terminal cabinet

C700 Fiber Optic Cabinet

C700 Fiber Optic Cabinet

The indoor C700-fiber optic cabinet is made of cold rolled steel or alloy for storage of fiber optics, jumpers and related control equipment. And its also the same as the network cabinet, it consists of a frame and a cover (door). It generally has a rectangular parallelepiped shape and is placed on the floor. It can provide suitable environmental and safety protection for fiber optic cables, shielding interference, ordering and neatly arranging optical fibers for future maintenance. This is the first level assembly after the system level. A cabinet that does not have a closed structure is called a rack.

READ MORE
10G SFP CWDM 1470nm SM MM 40Km Optical Transceiver Module

10G SFP CWDM 1470nm SM MM 40Km Optical Transceiver Module

The SFP+CWDM optical module is a low-cost WDM transmission technology for the access layer of the metropolitan area network. The SFP+CWDM optical module adopts CWDM technology, which can combine optical signals of different wavelengths and transmit them through one optical fiber through an external wavelength division multiplexer, thereby saving fiber resources. At the same time, the receiving end needs to decompose the complex optical signal using a wave decomposition multiplexer. The SFP+CWDM optical module is divided into 18 bands, from 1270nm to 1610nm, separated by 20nm between each two bands.

READ MORE
Figure 8 Fiber Optic Cable

Figure 8 Fiber Optic Cable

2fiber, Figure-8 structure,900μm or 600μm tight buffer fiber, Aramid yarn, PVC jacket.Speak in detail, the figure-8fiber optic cable uses two Φ900μm or Φ600μm flame-retardant tight-fitting optical fibers as the optical transmission medium, and is covered with a layer of aramid as the force-strengthening unit, and extruded a layer of 8-shaped polyvinyl chloride (PVC) or low-smoke. Halogen-free material (LSZH, low-smoke, halogen-free, flame retardant) sheathed.

READ MORE
GYTY53 digital fiber optic cable

GYTY53 digital fiber optic cable

GY: Outdoor (field) optical cable for communication T: Filled structure Y: Polyethylene 5: Wrinkled steel strip 3: Polyethylene sheath Fiber optic cable GYTY53, 2~144 fiber, central strength member (steel), jelly filled, fiber-containing loose tube and PP filler (if necessary) stranded, water blocking tape, PE inner sheath, longitudinally covered copolymer coated steel Belt, PE sheath. It has two different types: single-mode GYTY53 cable and multi-mode GYTY53 cable.

READ MORE
GPON 1281 Optical modem

GPON 1281 Optical modem

The optical network terminal product, GPON-1281 Optical modem, constructed as a FTTH network conforms to the ITU-T G.984 standard, WIFI dual- band wireless connection speeds of up to 300 Mbps on 24 GHz .and has dual-band wireless speeds up to 1200 Mbps, supporting 2/3 layer network protocols and high- quality voice transmission. GPON optical network terminals are characterized by reliability, good service quality assurance, manageability scalability, and flexible networking. Can meet data, data + voice, data + voice + WIFI and other access needs.

READ MORE
EOC 4051 Optical modem

EOC 4051 Optical modem

EOC-4051 Optical modem fully complies with the IEEE P1901 standard and China Telecom EOC equipment technical requirements. It has the characteristics of carrier-class operation, manageability and easy maintenance. It is a bridge-type home-side device and realizes ultra-wideband for home/SOHO users through EOC technology. Access. It has one PON uplink interface connected to the central office equipment through optical fibers. The structure is small, supporting the placement of the desktop, wall hanging or placed in the corridor information box. As an Ethernet coaxial terminal product, Ethernet access is performed using a coaxial cable. The EoC terminal device has a built-in Wifi wireless function and includes four 100M Ethernet ports for works with EOC master in Ethernet over coax network.Ability to provide high quality Internet access, voice, IPTV, VoIP and video surveillance.

READ MORE
Optical Fiber Adapter

Optical Fiber Adapter

Fiber optic adapters, also known as fiber optic couplers, are a special type of passive component designed to fit or connect the ends of a fiber optic cable with high precision. They are sometimes named as matching sleeves and hybrid adapters. The mating sleeve means that the fiber optic adapter is used to connect the same type of fiber optic connector, and the hybrid adapter is the type of fiber optic adapter used to connect different types of fiber optic connectors. The fiber adapter is paired with two ends of different fiber connectors to realize conversion between different connectors FC, SC, ST, LC, MTRJ, MPO, E2000, and the like. They are widely used in optical distribution frames (ODF), fiber optic communication equipment and equipment, with excellent performance and good stability.

READ MORE
Self supporting Pre terminated Drop Cable

Self supporting Pre terminated Drop Cable

The structure of the self-supporting pre-terminated drop cable is based on the Butterfly cable, and a metal suspension unit is added. With the continuous extension of the optical fiber like the user end, in order to meet the different uses and requirements, and expand the use range of the butterfly-introducing cable, on the basis of the Pre-terminated Drop Cable, a derivative product of the butterfly-introducing has emerged, the most typical one being The Self-supporting Pre-terminated Drop Cable is introduced into the optical cable.

READ MORE