J: Optical fiber tight covering structure, E: Elliptical shape, T: Filled structure JET outdoor fiber optic cable, 250μm, either of single-mode or multi-mode type, are positioned in a loose tube made of a high modulus plastic. The center of the cable core is a non-metallic reinforcing core (FRP) and reinforced core with water blocking yarn A layer of aramid yarn or high strength glass is applied around the cable core as additional strength member. The tubes are filled with a water-resistant filling compound. Then, the cable is completed with a black or color sheath.The original overhead line is used for long-distance communication and inter-office communication lines. Different types of aerial cables are suitable for hanging wire and self-supporting.
OLT C+ Optical Module, as a fiber optic transceiver module, is a self-contained component that can both transmit and receive. Usually, it is inserted in devices such as routers or network interface cards which provide one or more transceiver module slot (e.g GBIC, SFP, XFP). Powerlink provide a full range of optical transceivers, such as SFP+ (SFP Plus) transceiver, X2 transceiver, XENPAK transceiver, XFP transceiver, SFP (Mini GBIC) transceiver, GBIC transceiver, CWDM/DWDM transceiver, 40G QSFP+ & CFP, 3G-I video SFP, WDM Bi-Directional transceiver and PON transceiver. All our fiber transceivers are 100% compatible with major brands like . They are backed by a lifetime warranty, and you can buy with confidence. We also can customize optical transceivers to fit your specific requirements.
GPON-1080 optical modem constructed as a FTTH network conforms to the ITU-T G.984 standard, GPON optical network terminals are characterized by reliability, good service quality assurance, manageability, scalability and flexible networking. Can meet the access requirement of high-speed broadband.
The structure of the self-supporting pre-terminated drop cable is based on the Butterfly cable, and a metal suspension unit is added. With the continuous extension of the optical fiber like the user end, in order to meet the different uses and requirements, and expand the use range of the butterfly-introducing cable, on the basis of the Pre-terminated Drop Cable, a derivative product of the butterfly-introducing has emerged, the most typical one being The Self-supporting Pre-terminated Drop Cable is introduced into the optical cable.READ MORE
The 100G QSFp Optical Module integrates the receiver and transmitter paths on one module. At the transmitting end, the four channels of serial data are recovered, retimed, and passed to the four laser drivers. The laser driver controls a 4-distributed feedback laser (DFB) with center wavelengths of 1296 nm, 1300 nm, 1305 nm, and 1309 nm. The optical signal is multiplexed to a single mode fiber through an industry standard LC connector. On the receiving side, the four optical data stream channels are optically demultiplexed by an integrated optical demultiplexer. Each data stream is recovered by the PIN photodetector and transimpedance amplifier and retimed. The module features a hot-swappable electrical interface, low power consumption and MDIO management interface. Designed according to the QSFP Multi-Source Agreement (MSA), the product features a form factor, optical/electrical connection and digital diagnostic interface, and is compliant with the IEEE 802.3bm standard.
GPON-2480 Optical modem are manufactured and developed by ccofc company, which is a leader in FTTH/ FTTO broadband access network field. They are properly manageable added with features such as high-bandwidth, high reliability, low power consumption and satisfy the users requirement to access broadband, voice, data and video etc. The optical network terminal product constructed as a FTTH network conforms to the ITU-T G.984 standard, and has dual-band wireless speeds up to 1200 Mbps, supporting LC/L3 layer network protocols and high-quality voice transmission.
The SFP+CWDM optical module is a low-cost WDM transmission technology for the access layer of the metropolitan area network. The SFP+CWDM optical module adopts CWDM technology, which can combine optical signals of different wavelengths and transmit them through one optical fiber through an external wavelength division multiplexer, thereby saving fiber resources. At the same time, the receiving end needs to decompose the complex optical signal using a wave decomposition multiplexer. The SFP+CWDM optical module is divided into 18 bands, from 1270nm to 1610nm, separated by 20nm between each two bands.
Micro Type Splitter is highly protective for fiber optic lines and is the result of miniaturization of cassette optical splitters. It is mainly used in various types of wiring boxes or cabinets, and is an intermediate choice for compact size and reliable fiber protection. Micro Type Splitter, planar waveguide light optical distributor (PLC Splitter), is a kind of planar waveguide integrated optical device, it can be 1260nm ~ 1650nm such a wide range of wavelengths of light power reservation in realization, the distribution of wavelength range covers EPON technology used 1310nm, 1490nm and 1550nm three wavelengths. Especially suitable for EPON Ethernet passive optical network access technology FTTP fiber network system, broadband passive optical optical distributor (POS) use. Including 1x2, 1x4, 1x8, 1x16, 1x32, 1x64, and 2x2, 2X4, 2X8, 2X16, 2X32, 2X64 type.