GY: Outdoor (field) optical cable for communication T: Filled structure S: Steel strip--polyethylene bonding sheath GYTS cable is a communication cable with a similar optical transmission speed. The 250 μm fiber is located in a loose tube made of high modulus plastic. The tube is filled with a waterproof filling compound. The center of the core is a metal reinforcement.
2fiber, Figure-8 structure,900μm or 600μm tight buffer fiber, Aramid yarn, PVC jacket.Speak in detail, the figure-8fiber optic cable uses two Φ900μm or Φ600μm flame-retardant tight-fitting optical fibers as the optical transmission medium, and is covered with a layer of aramid as the force-strengthening unit, and extruded a layer of 8-shaped polyvinyl chloride (PVC) or low-smoke. Halogen-free material (LSZH, low-smoke, halogen-free, flame retardant) sheathed.
GYFDTA uses FRP as the central strength member ensures good tensile resistance,and improves the bending performance.The middle layer of aramid yarn increases the tensile strength of the cable. It has excellent moisture resistance ability:the loose tube is filled with grease to protect the fiber, APL tape prevent the water ingress, then the cable is completed with PE out sheath. It's suitable for aerial and duct application. Because of the good moisture resistance, it can also be used in cable trench. It has the loose tube structure with ribbon cable, which is surrounded by the APL tape. GYFDTA is a good option for interoffice communication,outdoor access network
Description of this QSFP AOC 40G Active Optical Cable fiber cable optical transceiver module manufacturer 40G QSFP+ AOC Optical module 40G QSFP+ AOC Optical module, QSFP + Active Optical Cables (AOCs
Fiber patch cords are fiber-optic cables with connectors on both ends that can be connected directly to a computer or other network device. Fiber patch cords are commonly used to connect light emitting devices, light receiving devices, and fiber optic terminal boxes. Single-mode fiber patch cord cores are particularly small in diameter, typically only 9 μm, and have only one light propagation path. It is for this reason that light can only be transmitted along the axis of the fiber, thereby completely avoiding the waste of dispersion and light energy.
Fiber optic adapters, also known as fiber optic couplers, are a special type of passive component designed to fit or connect the ends of a fiber optic cable with high precision. They are sometimes named as matching sleeves and hybrid adapters. The mating sleeve means that the fiber optic adapter is used to connect the same type of fiber optic connector, and the hybrid adapter is the type of fiber optic adapter used to connect different types of fiber optic connectors. The fiber adapter is paired with two ends of different fiber connectors to realize conversion between different connectors FC, SC, ST, LC, MTRJ, MPO, E2000, and the like. They are widely used in optical distribution frames (ODF), fiber optic communication equipment and equipment, with excellent performance and good stability.
FTTH optical fiber terminal box, outdoor optical fiber terminal box is used in wiring connection between optical cable and optical communication equipment, through adapter in distribution box, optical fiber jumper leads optical signal, realize optical wiring function, and can meet the optical splitter placed to achieve spectral function.FTTH terminal box from Foclink is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for mini-network terminal distribution, in which the optical cables, patch cores or pigtails are connected.
Professional fiber manufacturer from Guangdong province, China. The structure of GYTA53 optical cable is to insert a single-mode or multi-mode optical fiber into a loose tube made of a high modulus polyester material, and the casing is filled with a waterproof compound. A fiber reinforced plastic (FRP) locates in the center of core as a non-metallic strength member.