EOC-3050 Optical modem, as an Ethernet coaxial terminal product, Ethernet access is performed using a coaxial cable. The EoC terminal device has built-in WiFi wireless function, including three 100M Ethermet ports and one high- quality voice interface, which can support various data access requirements such as pure data, data +voice, data + voice + WIFI.READ MORE
C450-fiber optic cabinet is a high-capacity and high-density fiber distribution frame. It adopts high-quality cold-rolled steel frame/electrolytic plate and electrostatic spraying on the whole surface. It is widely used in small and medium-sized integrated wiring projects, equipment room, intelligent community, telecommunications, school. Such projects enable the connection, distribution and scheduling of fiber-optic lines, and the detachable design makes the products more flexible and simple in application.
The optical fiber unit, Pre-terminated Drop Cable, is positioned in the center.Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides.Then,the cable is completed with a black or color LSZH sheath. It is also called leather cable. It is a new type of user access optical cable. According to the application environment and laying conditions, the cable structure and various technical parameters are reasonably designed. The characteristics of indoor soft cable and self-supporting optical cable are collected. Special equipment is used in conjunction with imported precision mold production. It is the best candidate for FTTX network solution, and it is also suitable for users of other fiber-optic FTTO and FTTB networks. Because the cross-section is like a butterfly, it is called a butterfly cable. Both sides are reinforcing members in the leather line and optical fibers in the middle.
The cat 6e network cable is an upgraded version of the Category 6 network cable, so it is also called “Enhanced Category 6 Network Cable” and complies with the standards of ISO/IEC 11801:2002 and EIA/TIA 568-B.2-1. The performance of the other aspects is better than the six types of network cables. Compared with the six types of network cables, the outer diameter of the cat 6e network cable is larger. The weight is heavier and the minimum bending radius is larger, and the maximum transmission distance of the super six types of network cables is 100m, and it can be compatible with the six types and super five types of network cables.The cat 6e network cables are shielded (UTP) and unshielded (FTP), and there are significant differences in structure between the two.
GYDTA uses steel as the central strength member ensures good tensile resistance,and improves the bending performance. It has excellent moisture resistance ability:the loose tube is filled with grease to protect the fiber, APL tape prevent the water ingress, then the cable is completed with PE out sheath. It's suitable for aerial and duct application. Because of the good moisture resistance, it can also be used in cable trench. It has the loose tube structure with ribbon cable, which is surrounded by the APL tape. GYDTA is a good option for interoffice communication,outdoor access network.
The Insert Type PLC Splitters is branching devices that is used to distribute optical signals to multiple locations for processing. In optical networks, it is often necessary to split an optical signal into many identical signals, or to combine many signals into a single signal. PLC Splitter (Planar lightwave circuit splitter) is a type of optical power management device that is fabricated using silica optical waveguide technology. They are designed for FTTx Passive Optical Networks, CWDM, DWDM and optical cable TV System. PLC Splitter is responsible to distribute optical signals from Central Office (CO) to multiple premise locations.We provides whole series of 1*N and 2*N splitter products that are tailored for specific applications. All prodcts meet GR-1209-CORE-2001 and GR-1221-CORE-1999 requirements.
The SFP+ optical module is a new generation of 10 Gigabit optical modules that can meet Fibre Channel 8.5G and Ethernet 10G applications in accordance with the ANSI T11 protocol. The SFP+ is about 30% smaller than the previous XFP optical module, which looks the same as an ordinary 1-4G SFP optical module. SFP+ only retains the basic electro-optic and photoelectric conversion functions, which reduces the signal control functions of SerDes, CDR, EDC, MAC, etc. in the original XFP design, which simplifies the design of 10G optical modules and reduces power consumption. SFP+ has significant advantages such as high density, low power consumption and lower system construction cost. The products are widely used in the field of 10 Gigabit Ethernet fiber data communication, and are the mainstream products of 10 Gigabit modules.
The EPON-4081 Opical modem is a type of optical modem. The optical modem refers to a transceiver that converts the optical Ethernet signal into other protocol signals. The optical cat is also called a single-port optical transceiver. It is a product designed for a special user environment. A single E1 or single V.35 or single 10BaseT point-to-point optical transmission terminal device using a pair of optical fibers. EPON-4081 Opical modem, as an optical network terminal product built by FTTH network, the product complies with IEEE802.3ah , WiFi dual-band wireless connection speeds of up to 300 Mbps on 24 GHz, and Has high-quality EPON access capability. The EPON ONU optical network terminal has the characteristics of high reliability, good service quality assurance, manageability,scalability, and flexible networking, which can meet the requirements of high- speed broadband access.