APT-103M32OC

Product Model：

APT-103M32OC

Support IEEE 802.3x flow control function; support hot-swappable, plug-and-play; support store-and-forward or pass-through mode; have link failure alarm (LFP) function;

File Download

Inquiry

Online Message

隐藏域元素占位

Product Description

Product features

1、Compliant with IEEE802.3,IEEE802.3u,10/100Base-TX,100Base-FX and other standards;

2、Support IEEE 802.3x flow control function; support hot-swappable, plug-and-play; support store-and-forward or pass-through mode; have link failure alarm (LFP) function;

3、Network port support 10/100M, full/half duplex adaptive; network port Auto-MDI/MDIX auto-flip, parallel/crossover network cable adaptive;

4, ultra-low latency data transmission, fully transparent to network protocols;

5、Built-in 128KB RAM data buffer, supporting 2046Bytes long data packets;

6, 50/125um or 62.5/125um multimode fiber connection transmission distance up to 2km, 9/125um single-mode fiber connection transmission distance up to 120km

7, modular structure design, card type can be on the centralized power supply rack;

8, with 6 LED indicators, dynamic feedback link connection status and fault monitoring;

9, built-in 8-bit dip switch, a variety of forwarding / work mode users can adjust; built-in lightning protection circuit, can significantly reduce the damage caused by lightning induction;

Technical parameters:

Access method	10/100Mbps
Standard	IEEE802.3,IEEE802.3u,10/100Base-TX,100Base-FX Fast Ethernet, IEEE802.3x Flow control
Wavelength	1310nm/1550nm
Transmission Distance	Dual-fiber multimode: 2km, dual-fiber singlemode: 20/40/60/80/100/120km,Category 5 twisted pair: 100m
End port	1 RJ45 port: connecting STP/UTP Category 5 twisted-pair cable 1 fiber optic port: multimode: SC/ST (fiber size 50/125um,62.5/125um) Single-mode: SC/FC fiber optic port (fiber size 9/125um)
Conversion method	Media conversion, store-and-forward / direct pass
MAC address	1K
Buffer Space	288KB
Packet Length	Storage and forwarding: 2046Bytes, pass-through: unlimited length
Traffic Control	Full duplex: flow control Half-duplex status: back pressure method
Delay	Store-and-forward: 9.6us, pass-through: 0.9us
BER	<1/1000000000>
LED Indicator	POWER ， TX LINK/ACT ，FDX ， FX LINK/ACT ，FX100 ，TX 100
Power source	DC5V 1A (external)
Power consumption	<2.5W
Operating Temperature	0 ~ 50 ℃
Storage Temperature	-40~ 70 ℃
Relative Humidity	5%~90% （No condensation）