Optical Fiber Connector
1.Low insertion loss, high return loss.
2.The optical fiber connector has a tensile strength of not less than 40N.
3.The inside of the connector is welded with heat shrink tubing for reliable performance.
4.The fiber is aligned in the V-groove through the ceramic ferrule, and the side cover design provides complete retention of the matching liquid and the connector size can be produced according to customer requirements.
5.The optical fiber connector is suitable for termination of 250 micron pre-coated fibers or with 900 micron tight-fitting fibers.
6.The optical fiber connector is suitable for direct assembly on an outer jacket of a butterfly-introducing cable of size 2.0 x 3.0 mm.
7.The connector does not require special tools and can be equipped with crimping tools if necessary. It only needs to be equipped with common tools such as fiber strippers and fiber cutters. It does not require other power or complex tools.
8. The end of the connector is pre-polished at the factory to ensure the end face quality and good reflective properties of the connector, eliminating the need for grinding and gluing at the construction site, saving time.
Fiber type: singlemode/multimode
Inserted core cover: PC,UPC,APC
Use: patch cord,PLC splitter,pigtail
Color: blue, green, black or customized
Product Standards: YD/T 2341.2-2001
Place of Origin: Guangdong, China (Mainland)
Application: FTTX,CATV Metro,LAN
0.9mm tight buffer fiber, 2.0mm,3.0mm drop cable
Optical fiber diameter
SM (9/125), MM (50/125,62.5/125)
Tight buffer diameter
About 100s (no fiber cut)
>50dB (PC),>55dB (UPC),>65dB( APC)
Fastening strength of naked fiber
Fastening strength of naked fiber holder
On-line tensile strength(20N)
Mechanical durability (500 times)
Drop-off test (drop-off height 4m, once per direction, totally 3 times)