Self supporting Pre terminated Drop Cable

 

The structure of the self-supporting pre-terminated drop cable is based on the Butterfly cable, and a metal suspension unit is added. With the continuous extension of the optical fiber like the user end, in order to meet the different uses and requirements, and expand the use range of the butterfly-introducing cable, on the basis of the Pre-terminated Drop Cable, a derivative product of the butterfly-introducing has emerged, the most typical one being The Self-supporting Pre-terminated Drop Cable is introduced into the optical cable.
Features:
1.Cable can be used both outdoors and indoors.
2.It inherits all the advantages of the butterfly-shaped cable in the indoor wiring, and reduces the connection between the outdoor cable and the indoor cable.
3.The construction cost is lower and the cable reliability is stronger.
4.A single steel wire or steel strand is added with strong strength to make the cable have good compression resistance.
5.Unique “v” groove design, easy to peel, easy to connect, simplify installation and maintenance, and have stronger tensile strength.
6.The all-dry structure, which is produced by bending insensitive fiber, has excellent bending resistance.
7.The optical cable is suitable for on-site end, and the construction is safe and reliable, and it is not easy to cause construction failure.
8.The tensile strength is large, which is conducive to self-supporting overhead laying and vertical pipeline traction laying. It can also be laid by existing building shafts and channels. At the same time, it can be laid directly on the outer wall of the building.

Number of Fiber Cores: 1~4
Fiber Type: 250μm coated fiber or ribbon fiber
Sheath Color: black
Self-supporting Component: Steel strand
Laying Method: Overhead, pipeline
Proper Temperature: -20℃~+60℃
Repeated Bending: 20N/300 times
Smoke Density: light transmittance ≥50%
Application Standards: YD/T1997.1-2015
Application: Outdoor overhead introduction