Wiring cable for use in buildings
-
Duplex Figure 8 Fiber Optic Cable single mode
2fiber, Figure-8 structure,900μm or 600μm tight buffer fiber, Aramid yarn, PVC jacket.Speak in detail, the figure-8fiber optic cable uses two Φ900μm or Φ600μm flame-retardant tight-fitting optical fibers as the optical transmission medium, and is covered with a layer of aramid as the force-strengthening unit, and extruded a layer of 8-shaped polyvinyl chloride (PVC) or low-smoke. Halogen-free material (LSZH, low-smoke, halogen-free, flame retardant) sheathed. -
Breakout Fiber Optic Cable
Breakout Fiber Optic Cable is also called Large-core hybrid branch cable. The cable uses an 8-core sub-unit(900μm tight fitting fiber, an aramid reinforcing element) and a non-metallic center reinforcing core. The cable sub-unit layer is twisted on the center reinforcing core form a cable core, and the outer most layer is extruded with a polyvinyl chloride(PVC) sheathed LSZH or other agreed material jackets are also available upon request. For termination and maintenance, the drop cable facilitates independent routing or branching of the individual fibers. -
Figure 8 Fiber Optic Cable
2fiber, Figure-8 structure,900μm or 600μm tight buffer fiber, Aramid yarn, PVC jacket.Speak in detail, the figure-8fiber optic cable uses two Φ900μm or Φ600μm flame-retardant tight-fitting optical fibers as the optical transmission medium, and is covered with a layer of aramid as the force-strengthening unit, and extruded a layer of 8-shaped polyvinyl chloride (PVC) or low-smoke. Halogen-free material (LSZH, low-smoke, halogen-free, flame retardant) sheathed. -
Tight Buffered Fiber Optic Cable
Tight buffered fiber optic cable is produced as that fiber is sheathed by buffer material. The selection of top-quality fiber, the specific production equipment and the accurate design assure the performance of the product. To be more specific, a single-mode or multi-mode fiber with a tightly-coated secondary coating structure is called a tight buffered fiber or a tight-packed fiber, and is a double-over-plastic (PVC/PVDF) directly coated on a bare fiber (UV fiber). /LSZH/Hytrel), the outer diameter of the tight-fitting fiber is usually 0.6mm and 0.9mm. It is the basic component for manufacturing various indoor optical cables. It can also be used alone and twice coated with various materials. The tight-fitting fiber can be directly used as a pigtail for the connection of various optical active or passive components, the connection of instruments and terminal equipment, and the like.
